毕业设计（论文）-纺织品打包机设计.docVIP

临沂师范学院2008届本科毕业论文PAGE PAGE 22009届分 类 号：TS133.3单位代码：10452本科毕业设计纺织品打包机设计姓 名 学 号 年 级 2005 专 业 机械设计制造及其自动化系 （院） 工程学院 指导教师 2009年3月1临沂师范学院2009届本科毕业设计说明书 26 -摘 要我国是世界上最早生产纺织品的国家之一，但是我国的纺织品生产却相当落后。纺织品在运输过程中因为体积大、重量轻，导致运输费用和仓储费用等成本加大，使原本不大的利润空间下降的更低。因此，解决这一问题是十分迫切和必需的。针对这一问题本文设计了一种简单的打包机。本文介绍了纺织品打包机的控制机构、压缩室结构和打包机构等各部分的结构及原理；并对打包机出现的常见问题进行了分析和解决。本文设计的纺织品打包机，采用了自动打包方式；自动供绳，结扣和打包。这不仅减少了工人的劳动强度，而且提高了纺织品打包机的打包效率。关键词：纺织品；压缩；液压；打包AbstractThe our country is one of the nation which produced a textile product at the earliest stage in the world. But, the textile product production of our country very fall behind. The textile product is in the process of transport in big because of physical volume, weight light, cause cost enlargements, such as conveyance expenses and warehouse expenses...etc. Make the originally not big profits space descend of much lower. Therefore make this problem resolve is very urgent with essential. One kind in brief packs machine to be designed to aim at this problem. This thesis introduced the structure and principle that the textile product pack the control organization of machine and compress room structure and pack each part of organizations etc. And fought each other the problem that the chartered plane usually appears to carry on analysis to reach agreement to answer. The textile product of this thesis design packs machine and applied to automatically pack of way; Provide of auto rope, the knot buttons up and packs; Not only reduced the workers labor strength, but also raised a textile product to pack of machine an efficiency so.Key words：textile product; compress; the liquid press; automatically pack临沂师范学院2009届本科毕业设计说明书PAGE 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc224786332 1绪 论 PAGEREF _Toc224786332 \h - 1 - HYPERLINK \l _Toc224786333 1.1 引言 PAGEREF _Toc224786333 \h - 1 - HYPERLINK \l _Toc224786334 1.2 国内研究现状 PAGEREF _Toc224786334 \h - 1 - HYPERLINK \l _Toc2247863