浅析如何预防地铁机电设备使用中出现的事故(精选).docVIP

浅析如何预防地铁机电设备随着当今社会不断高速发展，城市中的道路交通已经无法有效的满足人们对于交通呈现出来的迫切需求，然而城市中地铁的出现恰好能够有力的满足大量乘客的需求，其以速度快以及耗能低和乘坐舒适等诸多优点，全面有力的缓解了城市交通中体现出来的压力。但是地铁在运行的过程当中，除了本身所具备的诸多优点之外，还存在以下缺点，例如：整体封闭性比较强且人员在流动性上比较大，地铁机电设备数量多且覆盖范围广，故障率较高，因此在地铁运营的过程当中会出现某些难以避免的安全风险，对人们的生命以及财产安全都有着严重的威胁。基于此背景，笔者结合自身多年工作实践工作经验，做出下文阐述，与大家共同探讨。 With the high-speed development of todays society, road traffic in the city have been unable to effectively satisfy people the urgent demand for traffic is present, however the emergence of metro in the city just can effectively meet the needs of a large number of passengers, with fast speed and low energy consumption and comfort, and many other advantages, fully reflected in effectively alleviate the urban traffic pressure. But the subway in the process of operation, besides itself has many advantages, also has the following disadvantages, such as: whole closed on liquidity is bigger, stronger and personnel subway electromechanical equipment number and the coverage is extensive, failure rate is higher, so in the process of metro operation will appear some of the hard to avoid security risks, both life and property safety of people has a serious threat. Based on this background, the author combines own work practice work experience for many years, described below, to discuss with you. 一、造成地铁机电设备发生事故分析 One, cause the subway accident analysis of mechanical and electrical equipment （一）人为因素笔者经过总结研究得出，人为因素是造成地铁事故的主要因素。（1）日常保养（2）维修质量(3以及人员素质等方面 (a) human factors the author after summing up research, human factors is the main factor causing subway accident. (1) daily maintenance (2) maintenance quality (3, personnel quality, etc （二）地铁机电设备因素（1）质量因素（2）高度集成因素（3）信号控制因素等（4）地铁控制信号因素。由于地铁信号控制系统突发故障导致列车停运的事故也经常发生，阻碍了地铁的真长运行。 (2) the subway mechanical and electrical equipment (1) the quality factors (2) a highly integrated factors (3) signal control factors etc. (4) the control signal. Trains due to the signal control system fault accidents often happen, hindered the really long running of th