TI bq76PL536-Q1 3-6组汽车锂离子电池监视解决方案.docxVIP

TI bq76PL536-Q1 3-6组汽车锂离子电池监视解决方案关键词：/search/?q=%B5%E7%D4%B4%B9%DC%C0%ED电源管理,/search/?q=%EF%AE%C0%EB%D7%D3%B5%E7%B3%D8锂离子电池,/search/?q=%B5%E7%B3%D8%BC%E0%CA%D3电池监视,/search/?q=%C6%FB%B3%B5%B5%E7%B3%D8汽车电池,TI 公司的bq76PL536-Q1是 3-6组锂离子电池监视器和二级保护集成电路，器件集成了高精度ADC，精度达±1 mV，14位分辨率，6us转换时间，具有热插入和高速SPI数据通信，主要用于电动汽车和混合动力汽车，电动自行车，UPS和大容量电池系统。本文介绍了bq76PL536-Q1主要特性，方框图，参考应用电路以及bq76PL536-3评估模块特性，单电源和三个电源连接图与bq76PL536系统应用框图。3 to 6 Series Cell Lithium-Ion Battery Monitor and Secondary Protection IC for EV and HEV ApplicationsThe bq76PL536-Q1 is a stackable three to six series cell lithium-ion battery pack protector and analog front end (AFE) that incorporates a precision analog-to-digital converter (ADC); independent cell voltage and temperature protection; cell balancing, and a precision 5-V regulator to power user circuitry.The bq76PL536-Q1 integrates a voltage translation and precision analog-to-digital converter system to measure battery cell voltages with high accuracy and speed.The bq76PL536-Q1 provides full protection (secondary protection) for overvoltage, undervoltage, and overtemperature conditions. When safety thresholds are exceeded, the bq76PL536-Q1 sets the FAULT output. No external components are needed to configure or enable the protection features.bq76PL536-Q1主要特性：3 to 6 Series Cell Support, All Chemistries?Hot-Pluggable?High-Speed SPI for Data Communications?Stackable Vertical Interface?No Isolation Components Required Between ICs?Qualified for Automotive Applications?Temperature Range –40℃ to 105℃?High-Accuracy Analog-to-Digital Converter (ADC):?±1 mV Typical Accuracy?14-Bit Resolution, 6-μs Conversion Time?Nine ADC Inputs: 6 Cell Voltages, 1 Six-Cell Brick Voltage,?2 Temperatures, 1 General-Purpose Input?Dedicated Pins for Synchronizing MeasurementsConfiguration Data Stored in ECC-OTP Registers?Built-In Comparators (Secondary Protector) for:?Over- and Undervoltage Protection?Overtemperature Protection?Programmable Thresholds and Delay Times?Dedicated Fault Output