毕业设计（论文）-于ProE软件的收音机后盖注射模具设计.docVIP

PAGE \* MERGEFORMAT III 中文摘要 基于Pro/E软件的收音机后盖注射模具设计 摘 要 本次设计主要是收音机后盖塑件的模具设计。首先分析塑件工艺结构，了解塑件的技术要求，测量塑件尺寸，绘制塑件图，选用ABS材料，设计出一套双模穴的塑料模具。同时，详细叙述了设计过程如何分析塑件制品的结构、性能，确定成型方案，成型部分的设计，导向机构、浇注系统、顶出机构、排气、冷却系统等，接着分析了如何选择模具钢种、模具标准件。 本套模具设计通过三维软件Pro/E对其造型，分析以及建模，并运用其插件EMX生成标准模架及模具标准结构件。详细介绍了一套塑料模具设计的全部过程。 关键词：型腔；型芯；模具设计；塑料模具；分型面 英文摘要 Design for radio back cover plastic mold based on Pro/E Abstract This design is mainly the radio back cover of plastic mould design. First analyzes models the craft structure, understood models the specification, the survey models a size, the plan models a chart, and selects the ABS material, designs set of double mold holes the plastic mold. At the same time, how in detail narrated the design process to analyze models a product the structure, the performance, determined took shape the plan, took shape the partial designs, the guidance organization, pours the system, goes against the organization, the exhaust, the cooling system and so on, how then analyzed has chosen the mold aluminum, the mold standard. This set of mould design get through three-dimensional software Pro/E to set modeling, analysis and modeling, use of the plug-in EMX produce standard model base and mould standard structure. Introduces a set of plastic mold all process design in detail. Key Words: Cavity; core; mold design; the plastic mold; divides the profile 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc296162897 中文摘要 PAGEREF _Toc296162897 \h I HYPERLINK \l _Toc296162898 英文摘要 PAGEREF _Toc296162898 \h II HYPERLINK \l _Toc296162899 1 绪论 PAGEREF _Toc296162899 \h 1 HYPERLINK \l _Toc296162900 1.1课题来源及意义 PAGEREF _Toc296162900 \h 1 HYPERLINK \l _Toc296162901 1.2模具在加工工业中的地位 PAGEREF _Toc296162901 \h 1 HYPERLINK \l _Toc296162902 1.3模具国内外发展趋势 PAGEREF _Toc296162902 \h 2 HYPERLINK \l _Toc296162903 2塑件工艺分析与注射机工艺参数 PAGEREF _Toc296162903 \h 4 HYPERLINK \l _Toc296162904 2.1塑件工艺结构分析 PAGEREF _Toc296162904 \h 4 HYPERLINK \l _Toc296162905 2.2塑料材料的成型特性与工艺参数 PAGEREF _Toc29616