毕业设计（论文）-于单片机的远程遥控系统的设计与实现.docVIP

远程遥控系统的设计与实现 摘要: 关键词：单片机；无线远程控制；直流电机；步进电机；驱动 Remote control system design and implementation Abstract: This design is to use computer technology and wireless communication technology to realize the remote equipment control. System includes remote terminal and equipment controller end. Remote part is composed of microcomputer, keys and wireless transmitters. It makes different key values according different button pushing and return equal control codes to equipment controller end. Equipment controller end is also a single-chip microcomputer control system, composed by single-chip microcomputer, dc motors, step motor, display lights and wireless receiver composition, and it controls different equipments according to the control codes sent by remote terminal. System control is convenient for use, and can be applied in remote household electronics control, in some high risk operating by remote controlling, and outdoor long distance communication. This paper describes the basic principle, method and design process of remote control system. Thesis mainly includes: system scheme comparison, system structure design, unit circuit design, system software design part and others, introduces design basic idea of remote control system, the way to construct the system framework and later system testing process. System solution argument is the premise. Overall system structure design plans the direction, implementation process and is the key part of the whole design. Unit circuit design is the most basic module and is to describe system working principle and each module working principle. Keywords: SCM, Wireless remote control, dc motor, Stepping motor, drive 目 录 1 绪 论 1.1 引言 1.2 远程无线遥控控制的现状 2 系统方案论证 2.1 系统介绍 2.2 方案论证 2.3 方案可行性研究 2.3.1 单片机选择 2.3.2 数据传输模块的选择 2.3.3 步进电机和直流电机选择 2.3.4 驱动电路器件 2.3.5 按键控制电路 2.3.6 器件工作状态指示等 3 系统整体结构设计 3.1 系统硬件总体设计 3.1.1 遥控器硬件总体设计 3.1.2 控制器硬件总体设计 3.2 系统软件总体设计 3.2.1 各程序实现方法 3.2.