车辆坡路起步防溜车置设计—毕业设计.docVIP

摘 要 本毕业设计的课题，主要任务是在设计 本文在述国内的基础上，对的结构进行了设计，对一些关键部分进行了计算。重点是的、和的设计及校核。 本文设计的采用机构，的基本框架将在， 本文对，等进行了设计计算，特别是对进行了分析计算。经过校核，在一定条件下，该能够。关键词：；；机构Abstract The task of the graduation is designing an system of the automobile sloping road start accelerating-coasting. The main task is the design of one set of mecha- -nism on the intermediate shaft in automobile gear box to solve the automobile sloping road start accelerating-coasting problem with causing the transmission system of the automobile at the front motion (I grade), under the coupling discrete state not to reverse. In the base of summarizing the study status on vehicles sloping road to start against accelerating-coasting installment state, the main structure of this install- -ment is designed, calculations of the key partments are carried on.Especially, the thorn wheel disk,the pawl plate and the control structure of installment are designed and checked. The installment adopt the ratchet, the thorn wheel plate and the pawl plate are framework. The pawl plate fixes in the box body and the thorn wheel disk fixes on the intermediate shaft in radial direction. The controlling arm is kept with the automobile. when the automobile enters, the installment start to work, the thorn wheel plate moves along with the intermediate shaft, simultaneously it moves to the pawl plate fixed on the box bodys, the pawl delimit on the notch wheel tooth face, pawl and hook tooth mesh. Therefore the thorn wheel plate can only freewheel, the intermediate shaft not be able to reverse. This article has carried on design calculation to the thorn wheel plate ,the pawl plate , the pawl and the control mechanism, and so on specially has carried on the analysis computation to the notch wheel and the pawl. After examination, under the controlled condition, this installment can solve the automobile sloping road to start against accelerating-coasting problem. Keywords: A sloping road starts against accelerating-coasting installment; Thorn wheel disk ;