车辆工程毕业设计（文）-基于逆向工程的C51变速器设计【全套图纸三维】.docVIP

摘 要 本课题是设计一个变速器，利用逆向工程的方式，即现有一个C51变速器实体，通过实验室的仪器测量得到基本尺寸（近似尺寸），对测量得到的数据进行分析筛选，取其有用的数据作为以后设计的参考或是验证所计算的是否合理。 全套图纸，加153893706 根据给定的所设计变速器需满足的条件如最大功率、最大扭矩、最高行驶速度等进行计算，通过一步一步的合理分析，求出制造所需的全部数据，其间用过的理论、公式等全部有资料作为支撑，在选取参数的时候恰到好处的运用所测得得数据,做到贴近成品，在调节不了实物与计算之间的误差时要以查阅的资料为依托，果断否定可能是测量带来的误差引起的争议，设计出合理的产品，不能一味的追求形式上的相似而使所设计的产品没有一点点价值。 基于C51变速器的反求工程，意在结构、形式上模仿C51变速器，必须保证在接口上的一致，使得做出来的产品有合适的相匹配的车型与之结合，反求出来的产品自己拥有其生产所需的数据和关键的技术，分析参数数据尝试创新，得到性能更好的更优良的产品。 目前，中国的汽车工业突飞猛进、日新月异，但是与美国、德国、日本还有很大的差距，在这种大环境还要持续几十年的大环境下，逆向工程一定会有它自己的价值，每个强者都是一步一步的走向胜利，在这个时期的中国汽车行业要吸收别国的先进技术，一点点的成为霸主。 关键词：逆向工程；C51变速器；先进技术；五档变速器；CATIA建模  ABSTRACT This topic is to design a transmission, using reverse engineering approach, that is, the existing a C51 transmission entity, through the laboratory instrument measurement get basic size (approximate size), to analyze the data measured screening, take its useful data as the reference or after verifying the design calculation is reasonable According to the given the designed to meet the conditions, such as transmission is the most high power, the maximum torque, highest speed is calculated, such as the reasonable analysis by step by step, for all the data needed for the manufacture, during which used theory, all has the material such as formula in selecting parameters of support, when measured using properly data, do it close to the finished product,Not real and in regulating calculation errors between the material with access to rely on, decisive denial may is measuring the controversy over the errors caused by, the design gives reasonable product, not blindly pursue formally similar and make the design of products have little value. Based on the reverse engineering of C51 transmission to structure, formally imitate C51 gearbox, must ensure thats consistent in interfaces that make the products that have suitable match bond with the models, reverse out products for own its production data and key technology, the analysis parameters obtained data, try to innovate