采矿工程毕业设计（文）-龙煤集团鹤岗分公司益新煤矿1.8Mta四水平延深设计【全套图纸】.docVIP

摘 要 本设计矿井为龙煤集团鹤岗矿务局益新煤矿四水平延伸设计，矿井设计产量1.8Mt/a。四水平一共有5层可采煤层，分别为3＃、7＃、8＃、9＃、11＃。 煤层总厚度为55.3米，煤层工业牌号为焦煤，设计井田的可采储量256.38Mt，服务年限为101年。本矿井设计采用以立井为主的多水平开拓方式，划分为四个水平，延伸后的四水平分为五个采区。四水平投产采区为南二石门3#层采区，采用单翼开采，一个工作面达产，达产时采区个数为一个。四水平煤层间距不大，巷道采用联合布置。设计确定四水平大巷煤炭运输选用皮带，四水平辅助运输采用8吨防爆型蓄电池电机车牵引3吨固定矿车运输。采用的采煤方法为走向长壁采煤法，采煤工艺为综采放顶煤工艺，顶板处理方法为全部跨落法。 关键词：矿井设计 水平延伸 联合开拓 全套图纸，加153893706 Abstract The design of the mine in Hegang Mining Bureau Longmei new coal interests extended four level design, mine design output 1.8 Mt / a, a total of four levels of a five-storey coal seam, respectively # 3, # 7, # 8, # 9, # 11, seam thickness of 55.3 meters. Industrial grade coal for coke, coal mine design recoverable reserves of 256.38 Mt, the service life of 101 years. The mine shaft design used mainly to the level of opening up more, divided into four levels, After the extension is divided into five four mining area. Four levels of operation for the Southern District Shihmen 3 # 2-mining area, using single-wing, mining, production of a face, When production of mining area for a number. 4 level spacing little seam, a joint arrangement. Designed to determine the level of roadway four coal transport belt use four auxiliary transport level using eight tons of explosion-proof motor vehicle traction battery 3 tons fixed tub transport, mining method used for longwall mining, coal mining technology for fully mechanized coal caving technology. Roof approach for the entire cross-loading method. Key Phrase：Mine design standards in developing joint extension 目 录 摘 要 1 Abstract 2 绪 论 3 第 1 章 井田概况及地质特征 8 1.1 井田概况 8 1.1.1 交通位置 8 1.1.2 地形 地势 8 1.1.3 主要河流湖泊水库沟塘的分布及地震史 8 1.1.4 气候 8 1.1.5 附近工矿农业概况及原料供应情况 9 1.1.6 煤田开发历史及近况 9 1.1.7 水电的供给情况 9 1.2 地质特征 10 1.2.1 矿区内的地层情况 10 1.2.2 井田范围内和附近的主要地质构造 12 1.2.3 煤层赋存状况及可采煤层特征 14 1.2.4 岩石性质 厚度特征 15 1.2.5 井田水文地质情况 16 1.2.6 沼气 煤尘及煤的自燃性 18 1.2.7 煤质牌号及用途 18 1.3 勘探程度及可靠性 19 第 2 章 井田境界、储量、服务年限 20 2.1 井田境界 20 2.1