英译汉基于FPGA的电梯控制器设计要点分析.doc

The design of elevator control system based on FPGA Elevator as a product of modern civilization, in the last century into our lives. Its design is very high speed integrated circuit hardware electronic design automation technology on the base of description language. Six elevator control program developed in this language control program development language.Electronic design automation technology is at the end of nineteenth Century and early twenty-first Century emerging technology, function and advantages of powerful is the embodiment of the design in the digital circuit and daily control system. With the rapid development of EDA technology, profound changes have taken place in the electronic system design techniques and tools, the large-scale programmable logic device FPGA, brought a lot of convenience to design personnel. HDL (hardware description language) with programmable logic device (PLD) developed, mainly used to describe the structure, behavior, function and interface of digital systems, electronic design automation (EDA) is one of the key technology. It usually adopts the design method of top-down, starting from the overall system requirements for the design.At present, some with FPGA design and implementation of the elevator control system from the magazine to see, the controller algorithm for arbitrary floor can not see in these articles, and the controller algorithm for arbitrary number of layers is the key to ensure the practicability and applicability of the controller. Therefore, this paper tries to design a N elevator control system using EDA technology, the concrete train of thought is: firstly the elevator controller algorithm, then implemented in hardware verification.1 elevator control systemThe elevator control system usually contains 1 functions: lift, drop, stop; open, closed the elevator door; request signal display, floor display; overload, fault alarm. The overload, fault alarm needs to use the sensor, the control is relativel