NXP-KinetisKV1x系列BLDC马达控制系统参考设计.docxVIP

NXP KinetisKV1x系列BLDC马达控制系统参考设计时间：2016-06-22 11:18:58作者：NXP来源：中电网NXP公司的Kinetis KV1x系列MCU采用ARM Cortex-M0+核,采用创新的90nm薄膜存储(TFS)闪存工艺技术,工作频率高达75MHz,集成了多达128 KB闪存和16KB RAM,非常适合用于工业马达控制,逆变器和低端电源转换器.本文介绍了Kinetis KV1x系列主要特性,框图,以及BLDC马达控制参考设计FRDM-KV10Z主要特性,框图,和电路图.The Kinetis V Series KV11x MCU family is built on ARM Cortex-M0+ core and enabled by innovative 90nm thin film storage(TFS) flash process technology. The KV11x is an extension ofthe existing KV10x family providing increased memory, higherpin count, additional FTMs and a FlexCAN serial interface.KV11x is ideal for industrial motor control applications, inverters,and low-end power conversion applications.Kinetis KV1x系列主要特性:Performance? Up to 75 MHz ARM Cortex-M0+ based coreMemories and memory interfaces? Up to 128 KB of program flash memory? Up to 16 KB of RAMSystem peripherals? Nine low-power modes to provide power optimizationbased on application requirements? 8-channel DMA controller? SWD interface and Micro Trace buffer? Bit Manipulation Engine (BME)? External watchdog timer? Advanced independent clocked watchdog? Memory Mapped Divide and Square Root (MMDVSQ)moduleClocks? 32-40 kHz or 4-32 MHz external crystal oscillator? Multipurpose clock generator (MCG) with frequencylockedloop referencing either internal or externalreference clockSecurity and integrity modules? 80-bit unique identification (ID) number per chip? Hardware CRC moduleCommunication interfaces? One 16-bit SPI module? One I2C module? Two UART modules? One FlexCAN module1Timers? Programmable delay block? Two 6-channelFlexTimers (FTM) for motor control/general purpose applications? Four 2-channelFlexTimers (FTM) with quadraturedecoder functionality? 16-bit low-power timer (LPTMR)Operating Characteristics? Voltage range: 1.71 to 3.6 V? Flash write voltage range: 1.71 to 3.6 V? Temperature range (ambient): –40 to 105℃Analog modules? Two 16-bit SAR ADCs? 12-bit DAC? Two analog comparators (ACMP) containing a 6-bitDAC and programmable reference inputHuman-