3503-J409给排水压力管道耐压试验条件确认与试验记录.docVIP

SH/T 3503-J409 给排水压力管道耐压试验 条件确认与试验记录 Record of Pressure Test and Test Condition Confirmation for Pressure Water Supply and Sewing Pipeline 工程名称Project： 单元名称Unit： Description System No. Test ambient Temp. ℃ Test medium Temp. ℃ Inspection items and requirements Result Pipeline has been erected, trench has been backfilled except positions where connections exist. Pipeline attachments, attached buildings have been inspected and are acceptable. Pipeline connections have been inspected and are acceptable. Strength of concrete for pipe sleepers and anchoring facilities are up to design standard. The axial position, elevation and gradient of the underground pipeline, as well as its basement and cushion have been double checked and are acceptable. Ends and openings of tested pipe spools have been sealed. Pipeline components not involved in test have been dismantled or isolated as per requirement. All valves in the testing system have been opened. The scale, accuracy, calibration state and disc diameter of the test use pressure gauge shall be in compliance with specification. Test record Pipeline No. Design pressure MPa Design Temp. ℃ Pressure test Tightness test Pressure MPa Medium Holding time Min. Pressure MPa Medium Holding time Min. Seepage L/min·km Allowable Actual Conclusion： Owner/Construction Supervision Contractor General Contractor Construction Contractor Discipline engineer： Date： Discipline engineer： Date： Discipline engineer： Quality inspector： Construction foreman： Date D.9 SH/T3503－J409给排水压力管道试验记录压力管道工作压力大于或等于0.1MPa的给水和排水管道。