压铸专用模温机宁波奥德机械.docVIP

压铸专用模温机宁波奥德机械 压铸专用模温机 Special mold temperature controllers for compression casting 特 点 Features 管路防爆装置 Explosion-proof device for pipelines 回油温度显示表 Thermometer for return oil 开机自动排气功能 Automatic air-exhausting function after startup 油泵反抽回油功能 Return oil back suction of oil pump 加热功率切换功能 Switchover of heating power 隔离式电器控制箱,延长电器使用年限 Isolated electric box for longer services lives of electric appliances 负压系统运转 选购 Negative-pressure system optional RS485通讯功能,实现自动化管理. 选购 RS485 communication function for automated management optional 即时冷却回油关机功能 Instant cooling return oil shut-down function 热油BY-PASS泄压回路 BY-PASS pressure release loop for hot oil 油泵马力和加热功率可订作 Customizable horsepower and heating power of oil pump 全系列采用西德SPECK油泵 磁力泵、永不漏油 SPECK oil pumps magnetic pumps never suffering from oil leakage imported from Germany for all series products 全系列采用欧美高温管路元件 American and European high-temperature pipeline components for all series products 电器采用OMRON. FUJI. TE. LG. Brands OMRON, FUJI, TE and LG for electric appliances 温度控制范围: 进水温+25℃→350℃ Range of temperature control: +25℃→350℃ for incoming water 304不锈钢一体管路,减少管阻及锈垢 304 stainless steel integrated pipelines for less pipe resistance and rust 控制方式: 采用进口微电脑或 选购 PLC控制 Control mode: imported microcomputer or PLC optional 安全保护完善,故障显示,维修.保养无需专业人员 Perfect safety protection, fault display, easy repair and maintenance even without professionals 机器规格 模型 单位 ADDC-18 ACCD-36 ADDC-48 ADDM-18 ADDM-36 ADDM-48 温控范围 ℃ 常温-300℃ 温控精度 ℃ PID±1℃ 电源 AC3∮380V 传热媒体 导热油 冷却方式 间接冷却 膨胀箱容量 L 25 25 30 42 42 50 加热能量 KW 9x2 12x2 20x2 18+18 24+24 40+40 泵浦功率 KW 0.55 1.1 2.8 0.55+0.55 1.1+1.1 2.8+2.8 泵浦流量 L/MIN 35 60 100 35+35 60+60 100+100 泵浦压力 Kg/CM2 5 5.5 6.8 5.0+5.0 5.5+5.5 6.8+6.8 最大电力消耗 KW 19 26 52 38 52 104 特殊功能 泵浦反转回油 警报功能 缺相/缺油/超温/过载/溢油/加热异常警报 冷却水配管 INCH 1/2 1/2 1/2 3/4 3/4 3/4 循环油配管 INCH 3/4 3/4 1 3/4x2 3/4x2 1x2 外型尺寸 MM 1250x420x1100 1250x420x1100