LG(J)阻容过电压吸收器中英文简介.docVIP

R-C dry over voltage absorber Main applicationsThe LG type over voltage absorber can absorb mainly the over voltage when turn on the Vacuums which and contactor, so that to protect electric motor and their insnlations. Structure of productThe LG type over voltage absorber uses super quality and high performance ins usation material as solid medium, with the unique high vacuum vaporation tech nology forming metal layer as the spelified electric pole strucuruce.The capacitor cells are fabricated by antomatic winder, then made up capacitor by intorduced technology, series connected with acustornbuild non-induction resitance combined the R-C voltage absorber, sealed in antiflame insulation case to form the three-phase or sigle-plase over voltage absorber. Main feature3.1 R -C over voltage absorber is made of non-induction vesistance and dry H.V capacitor, it has small volume, light weight, no oil structure can avoid the ambient pollution.3.2 Good protection than MOV, it can absorb steeply wave of over voltage.Main technical performanceRated Voltage: 3.6KV, 7.2KV, 12KV, 36KV;Rated Frequency: 50HZ;Resistance Value: 100Ω, 200Ω, 300Ω;Rated Capacitor: 0.05μF, 0.1μF, 0.2μF;Interelectrode Pressurization: 3Un below 12KV (AC) 10s 36KV: 80K 108KV Type: (1 min power frequency)Relevant standardsGB 311.1-311.6-83 Inaulation coordination, for high uoltage trans mission and trans for mation equipments High voltage test techniquesGB 3983.2-87H.V Shunt CapacitorQ/JR 02-01-1996R-C Overvoltage absorberR-C干式过电压吸收器主要用途RH-LG型过电压吸收器主要用于真空开关、真空接触器开合产生的操作过电压，以保证电动机变压器的绝缘免受过电压击穿之害。产品结构RH-LG型过电压吸收器选用优质、高性能的绝缘材料为固体介质，采用特殊的高真空蒸发工艺，蒸发上金属形成特定的电机结构。在自动卷制机上制成电容单元，再加以专利技术制成电容器，在于特制的无感电阻串联后用阻燃环氧树脂灌封成型，制成三相或单项过电压吸收器。主要性能特点3.1 RH-LG型过电压吸收器由无感电阻器和干式高压金属化电容器组成干式过电压吸收器，于油浸式阻容吸收器相比，有体积小、重量轻、无油不燃烧、无污染等特点；3.2 RH-LG型过电压吸收器在保证性能上比氧化锌避雷器反应速度快，可以吸收操作过电压的前沿陡坡。主要技术性能额定电压：3.6KV，7.2KV，12KV，36KV额定频率：50HZ额定电容值：0.05μF，0.1μF，0.2μF介质间耐压：12KV以下为3Un（工频10s）