国外模具标准.docVIP

ES-200 DIE DESIGN AND BUILD STANDARDS GENERAL CONDITIONS It is the vendor’s responsibility to read and understand these standards. 阅读并理解模具标准是模具供应商的责任 All Tools must comply with O.S.H.A. Federal Safety Standards and MIOSHA State Safety Standards. All corrections to the tool necessary to meet approval are the responsibility of the vendor and to be made prior to delivery to EE. It is the vendor’s responsibility to be aware of part print tolerances, critical characteristics, and important features that must be addressed in the design of the tool. EE engineering must approve the strip, 50% and final design before tool build is started. Part print revisions affecting the die build will be communicated to vendor as soon as is practical. Subsequent tool design changes must be reviewed and approved by EE engineering prior to implementation. We rely on our vendors to follow Good Die Practices, keeping in mind that EE is a High Volume Production House, requiring high quality durable tools. EE 工厂是一个高产量的生产厂家，所以模具需要用高质量的模具 The tool source will generate a Time Line immediately following the reward of the job or receipt of P.O. ; it shall be accurately updated and sent by 12:00 noon every Thursday. All materials needed to build the tool, including purchased items, are the responsibility of the vendor to supply unless otherwise specified in writing by EE Manufacturing. Dies are to be designed to feed per EE Manufacturing engineering specifications. Dies must be capable of running at the cycle rate as specified by EE. In the request for quotation and/or purchase order. Parallels are to be supplied to suit press. (Press specification will be furnished by EE Manufacturing.) Fork width opening will be determined during die design review. One (1) complete set of replacements for purchased punches, pilots and buttons are to be shipped with die. Etch with EE job numbering system if possible. Perishable/Purchased Tooling as defined during Die Design review process. A Perishable