说明书美标旋启式止回阀E.docVIP

Customer Service Centre Direct Line：座机电话号码 Sales Department：座机电话号码，8222 Ttechnical Department：座机电话号码 Fax：座机电话号码 E-mail：baoyi@ handbook order no.：S2001-H Baoyi Valve Group Copyright?2001 Printed in Chinese The specification in this instruction is subject to change without notice. INSTRUCTION Product Name： Swing Cheek Vlave Model：H44H-25 Nominal Diameter：DN50～500 Nominal Pressure：PN2.5MPa BAOYI GROUP CO., LTD. Address：OubeiThird Bridge Industrial Estate Wenzhou 325105 Tel：座机电话号码 2. Cleanup the valve before installation, make sure the label and marks on the valves suit the use condition. 3. Valve must be installed according to the arrow direction. Contrary installation disallowed. Installation based on the convenience of operation and maintenance . 4. Fix the valve at a horizontal or vertical pipeline. If installed at the vertical line, make sure the flow arrow direct upwards. Medium regular flow direction is from top to bottom. Malfunctions and Methods of Settlement Faults Reasons Eliminate ways The connection between body and bonnet leakage. 1.Bolts loose or unevenness. 2.Flange sealing surface damaged or dirt. 3.Gasket unavailable. 1.Equably tighten up the bolts. 2.Repair sealing surfaces or weed out the dirt. 3.Change gasket. Sealing leakage. 1.Sealing surfaces dirt. 2.Sealing surface damaged. 1.Cleanup the surfaces. 2.Repair the sealing surfaces. Disc turned inflexible 1. Disc spindle dirt. 2. The close fit between disc and spindle damaged 1. Clear away the dirt. 2.T Take apart to repair. -4- Swing Cheek Valve Application and Specification Suitable for the non corrodible medium such as water, oil and gas etc. Worked as the one way check valve equipment auto control the medium flow direction. Standard item design pressure temperature face to face end flange diameter test and inspection standard GB 12236 GB 9131 GB 12221 HG 20596 JB/T 9092 Specification test object strength test high - pressure sealing test low - pressure sealing test medium water air u