(word)毕业设计说明书(论文)封面、中外文摘.docVIP

南京理工大学泰州科技学院 毕业设计说明书 论文 作 者: 张后辉 学 号： 0座机电话号码8 学院 系 : 机械工程学院 专 业: 机械工程及自动化 题 目: 170右曲轴箱双面钻专用机床液压 系统及夹具设计 指导者： 评阅者： 2013 年 5 月 毕业设计说明书（论文）中文摘要 摘要 170右曲轴箱双面钻专用机床的动力滑台（1HY25），自动化程度高，工件的定位、夹紧均是通过液压系统来实现，控制工作进给的滑台是由通用部件及某些专用部件所组成的，是高效率和自动化程度较高的专用机床必不可少的部件。它能完成钻，镗，铣端面，倒角，攻螺纹等加工和工件的转位，定位，加紧，输送等动作。通用部件按功能可分为动力部件，支撑部件，输送部件，控制部件和辅助部件五类。动力部件是为组合机床提供主运动和进给运动的部件，主要有动力箱，切削头和动力滑台。卧式双面组合机床液压进给系统及液压夹具装置是用来控制液压动力滑台的，通过动力滑台来实现组合机床的各个动作从而完成工件的加工。液压系统中有四个液压缸，其中一个为工作进给缸，另外三个是夹紧缸。该系统中采用标准液压传动同时实现工作循环。 关键词 组合机床 高效率 自动化 动力滑台 液压系统 毕业设计说明书（论文）外文摘要 Title 170 right crankcase sided drill special machine hydraulicSystem and fixture design Abstract 170 right crankcase sided drill special machine power sliding 1HY25 , high degree of automation, the positioning of the workpiece clamping are hydraulic system to control feed slide by common components and some dedicatedparts, special machine with high efficiency and high degree of automation essential components. Can complete the drilling, boring, face milling, chamfering, tapping processing and translocation of the workpiece, positioning, step up, transportation and other action. Common components can be divided into the power unit, supporting parts, transmission parts, five types of control components and accessories. Power unit combination machine with the main movement and feed the moving parts, the main power box, cutting head and power sliding table. The horizontal double-sided combination of machine tool hydraulic feed system and hydraulic clamping device is used to control the hydraulic power sliding, Power Sliding action to achieve a combination of machine tools in order to complete the processing of the workpiece. The hydraulic system has four hydraulic cylinders, two of them into work to the cylinder, a positioning cylinder, a step up cylinder. The system uses standard hydraulic transmission duty cycle at the same time. Keywords machine tool high efficiency automation power sliding hydraulic system 高级工程师 杨正文