4160英文系列参数.doc

The Common Specifications （文章出于 HYPERLINK ，如需更多资料请访问网站） HYPERLINK javascript:history.go(-1); Back to Previous Page (Applicable to all instrument configurations) Specification parameters are defined per ISAs S5.1 Committee and SAMAs RC-2 0-11-1964 standard. Performance of a particular model may vary from these specifications, and may also be influenced by environmental factors. For further data, please consult the factory.（技术参数由ISA’s S5.1委员会和SAMA’s RC-2 0-11-1964标准详细说明。某些特殊型号的指标可能和这些技术指标有所不同，也可能会受环境影响，要得到更多数据，请向厂家咨询。） Accuracy: 精度 Analog units: ±2.0% of full scaleDigital units: ±2.0% of reading, ±1 least significant digit 读数的2%±最后一位数 (Limited to accuracy of calibration standard) Repeatability: 重复性 ±0.5% of full scale MinimumDetectability: 最小检出 1.0% of full scale Linearity: 线性 ±1.0% of full scale Zero Drift: 零点飘移 ±1.0% of full scale (24 hours) Span Drift: 跨度飘移 Less than ±2.0% of full scale (24 hours)The zero and span drift specifications assume that the analyzer is equilibrated, and is at constant temperature, with a properly maintained sensor. Drift is defined as an undesired change in output over a period of time, which change is unrelated to input, operating conditions, or load. Lag Time: 延迟时间 Less than 1 second 小于1秒 Calibration: Against standard gas mixture, or via INTERSCANs Electronic Calibration Service （文章出于 HYPERLINK ，如需更多资料请访问网站）