backlight introduction.ppt

Workings principle of a backlight Workings principle of a backlight Workings principle of a backlight Workings principle of a backlight Workings principle of a backlight Workings principle of a backlight Workings principle of a backlight Backlight System Introduction PD, Illumination 10/Dec/2007 Contents Backlight structure Optical foils LED LG and Housing Spec definition Measurement system Development trend LCD DBEF Top prism Bottom prism Diffuser LG Reflector 1. BL Structure Rim sheet Top prism Bottom prism Diffuser Lightguide and Housing Reflector + + + + + LED Backlight 2. Optical foils ESR from 3M with a thickness of 65 mm. Next generation is ESR2 with 32um thickness. Silver reflector, like Kimoto GR25D (43um), GR38(80um) Diffuse white Reflector, like E63#75 (75um). Transflector for dual screen module Reflector Make the light more uniform Top diffusor used to reduce hotspot Introduce asymmetrical design to prevent wrong assembly orientation. Diffusor TBEF / BEF Brightness Enhance Film from 3M Bottom is TBEF (62um), in x direction, 90/24 Top can be TBEF or BEF(140um), 90/24 Both the prism structure on the topside. The orientation of prism of top and bottom is perpendicular. There could be a tilted angle introduced for the prism foils. Introduce asymmetrical design to prevent wrong assembly orientation. Prism line pealing off HLAS1.20Vi / HLAS2.20Vi Brightness Enhance Film from LGS Bottom is HLAS1.20Vi (67um), in x direction, 93/21 Top can be HLAS1.20Vi or HLAS2.20Vi(145um), 93/21 Both the prism structure on the topside. The orientation of prism of top and bottom is perpendicular. There could be a tilted angle introduced for the prism foils. Introduce asymmetrical design to prevent wrong assembly orientation. Prism line pealing off Rim Sheet Glue on rim-sheet Glue into groove TBEF High temperature + extra-pressure + time The