HYDRO-LEDUC卡车泵.docVIP

HYDRO-LEDUC卡车泵 HYDRO LEDUC launches North American SAE versions of its high performance and highly successful bent axis pumps and motors HYDRO LEDUC推出北美版本（SAE）的高性能和高度成功的斜轴泵和马达 HYDRO LEDUC is a specialist and major European manufacturer of high performance hydraulic components for the European and American markets. HYDRO LEDUC是一家专业和欧洲主要制造商，在欧洲和美国市场的高性能液压元件。 SAE bent axis XA pumps and MA motors are now available for the North American.现已为北美SAE弯曲轴XA泵和MA电机。 XA bent axis pumps are specifically designed and engineered to meet the needs of the truck hydraulic market, and for direct flange-mounting on the PTO. XA斜轴泵是专门设计和设计，以满足卡车液压市场的需求，法兰直接安装在PTO。 The very compact size envelope makes them easy to install on vehicle chassis.非常紧凑的尺寸封装，使他们很容易安装在汽车底盘。 Suitable for service pressures of 5,080 psi 350 bar continuous, 5,800 psi 400 bar peak, they are ideal for use with knuckle-boom cranes, hook loaders and other demanding applications.适用于服务压力5,080 psi（350 bar）的连续，5800 psi（400 bar）的峰值，它们是使用关节臂起重机，吊钩式装载机和其他要求苛刻的应用的理想选择。 All models are built with 7 pistons, offering optimal flow regularity.所有型号都内置7活塞，提供最佳的流动规律。 Supplied an with inlet fitting, the direction of rotation of the pump is configured by simply changing the position of a setting screw, and putting the inlet fitting on what was previously the output side.提供一个与入口管接头，泵的旋转的方向配置，通过简单地改变的设定螺钉的位置，并把什么是先前的输出侧上的入口接头。 Available in displacements from 1.1 cu.排量从1.1立方米。 In.在。 18cc to 3.84 cu. （18CC）为3.84立方米。 in. 63cc 英寸（63cc） MA bent axis motors are suitable for all the main mobile and industrial applications, in open or closed loop circuits. MA弯曲轴电机适用于所有主要的移动和工业应用，在开环或闭环电路。 Service pressure capabilities are up to 5,800 psi continuous, 6,525 psi peak, and rotating speeds possible from 50 to 8,000 rpm.服务的抗压能力高达5,800 psi连续，6,525 PSI高峰，可能从50到8,000 rpm的转速。 These motors combine high performance and reduced size envelope.这些电机结合了高性能和减少大小的信封。 Spline shafts and keyed shafts are available, all with SAE C 4 bolt mounting configurat