gprs--sim300 通信 数据传输.docVIP

gprs--sim300 通信 数据传输 #include uartchang.h #include hal.h #include gps4u.h #include stdio.h #include string.h #include stdlib.h #include mydefine.h Login_Packet sPktLogin = {20005,secret,}; Track_Packet track = {20005, 0, 0, 0, 0, 100, {0, 0, 0, 0,0,0}}; extern UINT8 senddata; static int nPort; // uart port to which gprs modem linked static int rssi; static int nSendBytes=0; static int nRecvBytes=0; static int nPktBytes; static char pktBuffer[300]; static char sendBuffer[300]; static char recvBuffer[300]; //static char sCmdSetup[] = +CGDCONT=1,\IP\,\CMNET\;+CGACT=1,1; //设置PDP上下文的AT指令 static char sCmdOpen[] = +CIPSTART=\TCP\,\203.171.235.80\,\9950\; //static char sCmdOpen[] = +CIPSTART=\TCP\,\220.172.239.71\,\8388\; static char sCmdClose[] = +CIPCLOSE; //static char sCmdRead[] = ^sisr=0,1456; static char sCmdWrite[64];// = +CIPSEND; //写数据命令 //static char sCmdQuery[] = +CIPSTATUS; //查询IP状态的命令 //static char sCmdShud[] = +CIPSHUD; //static char bCanRead; static char bCanWrite; static char bConnected; static char bRegistered; static char bStop; unsigned char bLoginOK; //标志是否已经登陆 //static char bIPState; //标志IP连接状态，有STATE: CLOSE ；STATE: CONNET OK //static char bIPInitial; //标志IP刚开始初始化 //static char bReOpen; //当接到ALREADY CONNECT时，赋值 static char bSending; //表示正在发送当中 //static char bRecving; //表示正在接收数据 //#define ComfirSend() Send1a(); #define uart_check() vgUartCheck() //检查是否收到数据 #define uart_getc() vgUartGetC() //接收一个字符 #define uart_putb(p,n) UarT1SendWord(p,n) //发送字符串 #define uart_getb(p,n) vgUartGetB(p,n) //接收字符串 #define uart_clear() vgUartClearBuffer() //清除串口中的缓冲 #define msleep(x) halWait(5*x) // ClearBuffer /////////////////////////////// void ClearBuffer(void) { nSendBytes = 0; nRecvBytes = 0; nPktBytes = 0; } // GPRS_Stop ///////////////////////////////// void GPRS_Stop(void) { bStop = 1; } // GPRS_Start /////////////////////