AVC Engineering Specification Rev E.docVIP

Specification for AVC? Active Voltage Conditioner AVC(有源电压调节装置)技术规范书 General Requirements 概述 Scope 适用范围 Furnish factory assembled AVC in accordance with the contract documents and the following specification with all elements to conform to all relevant standards of manufacturing and construction, including but not limited to, IEEE 519-1991, ANSI C33.4, SEMI 47, NEMA AB-1, NEMA PB-1, and NEC or CEC standards. AVC的制造厂按照合同文本及以相关标准，包括但不限于，IEEE 519-1991, ANSI C33.4, SEMI 47, NEMA AB-1, NEMA PB-1, and NEC or CEC 标准。 Work of this section, as shown or specified shall be in accordance with the requirements of the contract documents. 合同文Off-loading, installation, interconnecting cables and lugs and all associated costs are the responsibility of the contractor. Installation shall be in accordance with the manufacturer’s recommendations. 装卸，安装，连接电缆和和所有相关费用。安装应按照制造商的建议Work Included Furnish components for AVC units as herein specified. AVC的组成部分Provide all materials and services for manufacturing, testing, and delivery to a designated jobsite. The work required under this contract shall include the following: 把原材料运送到指定作业，并。这项工作根据合同应包括以下内容Furnishing AVC as herein specified. AVC的组成部分 Complete configuration drawings and installation drawings. 外型尺寸及安装图纸 Factory tests as herein specified. 试验报告 Submittal Requirements 订货需知 The information with the bid shall include, at a minimum, the following items. 订货时最少提供以下信息 Technical proposal, including specification and description of components, system ratings, Voltage Sag/Surge capabilities, efficiency at load conditions and operation. 技术系统，。Outline and installation drawings’ showing dimensions and weight of the equipment, along with external power cable connections and recommended cable entrances and exits. 外形尺寸，安装图纸，重量，以及外部电源电缆连接，口。Proposed fabrication schedule, factory test dates and delivery date per contract documents. 制造，工厂试验和交货日期为合同文件。Warranty schedule 保修时间表 Bidders shall provide a compliance review of all specifications and