New BYK additives CN 2012.pptVIP

* * * * Chemistry 化学结构: CPT-based structured acrylate co-polymer 基于CPT技术的结构型丙烯酸酯类共聚物 Solids content 固含量: 60% Solvent 溶剂: Methoxypropylacetate PMA Amine value 胺值: 61 mg KOH/g DISPERBYK-2022: Product Profile产品概况 Pigment Stabilization in TPA with DISPERBYK-2022 DISPERBYK-2022在TPA体系中的颜料稳定性 Bayferrox yellow 3920 Bayferrox red 130M 16,5%* DISPERBYK-2022 No additive System: TPA Paraloid B66 * additive as delivered on pigment 13%* DISPERBYK-2022 No additive Bayferrox is a trademark of Lanxess Paraloid is a trademark of Rohm Haas Adhesion Test Results 附着力测试 “Direct-to-metal“ applications 直接涂装在金属底材的应用 2.5%* DISPERBYK-2022 * Additive as supplied on resin solids助剂供应型式对固体树脂计 Alkyd/Melamine baking enamel direct to cold rolled steel 醇酸氨基体系烤漆直接辊涂在冷轧卷钢上 Typical impact of wetting dispersing additive 润湿分散剂的典型影响 Additive 1 basic碱性 Additive 2 acidic酸性 DISPERBYK-2022: Summary DISPERBYK-2022:总结 Isocyanate-free widely compatible product from long-oil Alkyd to 2-Pack PU 不含异氰酸酯具从长油醇酸至双组份聚氨酯都有广泛相容性的产品 Strengths in TPA, TPA/CAB and NC-combi Millbase formulation with and without resin 有树脂或无树脂研磨 Adjustment of millbase viscosity by decreasing of resin amount in grinding 在研磨阶段降低研磨树脂用量来调节研磨浆粘度 For single and co-grinds 共研磨和分色研磨 Excellent adhesion “direct-to-metal”优秀的金属底材附着性 Positive impact on salt spray resistance due to improved adhesion 由于附着力的提高所以对耐盐雾性能有所提高 BYK-1794 Emission and Silicone-free Polymeric Defoamer for Solvent-free, Solvent-borne, High-solid and UV-Systems 用于无溶剂、溶剂型、高固体份和 UV 体系的零释放、不含有机硅的聚合物型消泡剂 ? 100 % solids 100% 固体份 - Emission-free 零释放 - Meets AgBB standard as well as Swiss and French regulations 符合 AgBB（德国）标准以及瑞士、法国相关法规 - VOC-free 不含 VOC ? Suitable for direct food contact in accordance with FDA and EU provisions 适合于食品直接接触的应用场合，符合 FDA 和 EU 相关法规 ? Highly effective defoamer/air release agent, particularly suitable for  solvent-free high-solids and thick layer systems. 高效消泡剂/脱泡剂，尤其适合无溶剂/高固体份以及厚涂体系 ? Recommended for pigmented and non-pig