有限元英语文献及译文.docVIP

7. INTRODUCTION TO THE FINITE ELEMENT METHOD Engineers use a wide range of tools and techniques to ensure that the designs they create are safe. However, accidents sometimes happen and when they do, companies need to know if a product failed because the design was inadequate or if there is another cause, such as an user error. But they have to ensure that the product works well under a wide range of conditions, and try to avoid to the maximum a failure produced by any cause. One important tool to achieve this is the finite element method. ?The finite element method is one of the most powerful numerical techniques ever devised for solving differential (and integral) equations of initial and boundary-value problems in geometrically complicated regions.” (Reddy, 1988). There is some data that can not be ignored when analyzing an element by the finite element method. This input data is to define the domain, the boundary and initial conditions and also the physical properties. After knowing this data, if the analysis is done carefully, it will give satisfactory results. It can be said that the process to do this analysis is very methodical, and that it is why it is so popular, because that makes it easier to apply. “The finite element analysis of a problem is so systematic that it can be divided into a set of logical steps that can be implemented on a digital computer and can be utilized to solve a wide range of problems by merely changing the data input to the computer program.” (Reddy,1988). The finite element analysis can be done for one, two and three-dimensional problems. But generally, the easier problems are those including one and two dimensions, and those can be solved without the aid of a computer, because even if they give a lot of equations, if they are handled with care, an exact result can be achieved. But if the analysis requires three-dimensional tools, then it would be a lot more complicated, because it will involve a lot of equations that are very d