concrete5(new).pptVIP

5.2 The Mechanism of Shear resistance in RC Beams without Web Reinforcement(无腹筋梁) 5.2.2 Stress state of RC beams without web reinforcement after diagonal cracks 5.2.3 Failure Models of diagonal section of  beams without web reinforcement *Shear span to effective depth ratio (for concentrated load剪跨比) or span to depth ratio (for distributed load跨高比) determines the failure models of a beam without web. 5.3 The Mechanism of Shear resistance in  RC Beams with Web Reinforcement 5.3.1 Stress state of RC beams with web reinforcement before and after diagonal cracks （1）Before diagonal cracks the stress of web reinforcement is small, RC beams with web reinforcement works just as that without web reinforcement. （2）After diagonal cracks RC beams with web reinforcement works as “truss-arch” model. 5.3.2 Failure Models of diagonal section of beams with web reinforcement 1.Diagonal compression failure: Stirrups are over（without reference to shear span ration） Before stirrups yielded,the concrete among diagonal cracks is crushed by principle compression. Vu:fc,b,h 5.4 Factors affected the capacity of diagonal section 1.Shear span ratio（剪跨比）: ? ①For beams under concentrated load without web reinforcement (2)For isolated beams under concentrated load (or under both concentrated load and distributed load, when the shear force produced by concentrated load at the support is equal to or more than 75% of the total force), the shear resistance is： 5.5.3 Design Equations for shear strength of members with web reinforcement stirrup ratio ?sv=Asv/bs=nAsv1/bs ③For isolated beams under both concentrated load and distributed load, when the shear force produced by concentrated load at the support is equal to or more than 75% of the total force, the shear resistance is 5.5.4 Bounds of shear strength of beam 1.Upper bound value（上限值） prevent beam from diagonal compression failure ?svmax and minimum dimension of section. hw/b ?4: V? 0.25 ?cfcbh0 hw/