Moldplus.docVIP

Moldplus Date revised - April 28, 2002 #Current version MOLDPLUS V9.09.28 //04-25-2002 [moldplus] 10000. 选择选项 10001. 选择曲线 10002. 选择曲面 10003. 选择边界 10004. Impossible to project onto a parallel plane 10005. Enter the offset distance: 10006. Creating parting lines 10007. in direction 10008. Offset distance= 10009. Draft angle= 10010. Offset distance from base curve: 10011. Select a surface near the edge 10012. Give the angle from the normal: 10013. Select a curve on the surface 10014. Give the chordal 公差: 10015. Select plane position defined by a point 10016. Creating X section normal