电工与电子技术文习题.docVIP

《电工与电子技术》英文习题 1.2 4 Determine the power being absorbed by each of the circuit shown Fig 1.26. Fig 1.26 1.3 8 In the simple circuit shown in Fig 1.30, the same current flows through each element. If Vx=1V and VR=9V, compute: (a) the power absorbed by element A (b) the power supplied by each of the two sources (c) Does the total power supplied=the total power absorbed? Is your finding reasonable? Why (or why not)? Fig 1.30 Fig 1.31 1.3 9 For the circuit in Fig 1.31, if u2=1000i2 and i2=5mA, determine us。 1.4 12 Let R=1200 for the resistor shown in Fig1.32. Find the power being absorbed by R at t=0.1s if : (a) (b) (c) ; Fig1.32 Fig1.33 15 In the circuit in Fig1.33, the same current must flow through all three components as a result of conservation laws. Using the fact that the total power supplied=total power absorbed, show that the voltage across resistor R2 is given by: 2.3 5 Find ix in each of the circuits in Fig 2.30. (a) (b) (c) Fig 2.30 12 Use Ohm’s and Kirchhoff’s law on the circuit of Fig 2.36 to find (a) ; (b) ; (c) ; (d) the power provided by the dependent source. Fig 2.36 Fig 2.41 18 Find i1 in the circuit of Fig 2.41 if the dependent voltage source is labeled: (a) 2v2 ; (b) 1.5v3 ; (c) -15 i1 . 32 (a) Using series combination of sources, compute i for circuits in Fig 2.53. Fig 2.53 Fig 2.60 2.8 40 (a) Find Req for each of the resistive network shown in Fig 2.60. 52 Use current and voltage division to help obtain an expression for v5 in Fig 2.71.