显示各种图像和汉字但要更改相应部分(用单片机和12864绝对能用).docVIP

/******************************************************* 项目名称：显示各种图像的程序 作者所在单位：电子科技大学 作者：吴鉴鹰 *******************************************************/ #includestdio.h #includereg52.h #includemath.h #includeintrins.h sbit RS=P0^0; sbit RW=P0^1; sbit E=P0^2; sbit PSB=P0^3; sbit RES=P0^4; E=1 ; byReturnValue=Lcd_Bus ; E=0 ; return byReturnValue ; } /*增加画点子程序 函数功能：在坐标为（x,y)点画一个点 参数意义 X：12864屏幕的横坐标，范围是0到128(从左到右) Y:12864的纵坐标，范围是0到64(从上到下) Color：为1的时候表示为黑点 */ void DrawPoint(unsigned char X,unsigned char Y,unsigned char Color) { unsigned char Row,Tier,Tier_bit ; unsigned char ReadOldH,ReadOldL ; write_com(0x34); write_com(0x36); Tier=X4 ; Tier_bit=X0x0f ; if(Y32) { Row=Y ; } else { Row=Y-32 ; Tier+=8 ; } write_com(Row+0x80); write_com(Tier+0x80); ReadByte(); ReadOldH=ReadByte(); ReadOldL=ReadByte(); write_com(Row+0x80); write_com(Tier+0x80); if(Tier_bit8) { switch(Color) { case 0 : ReadOldH=(~(0x01(7-Tier_bit))); break ; case 1 : ReadOldH|=(0x01(7-Tier_bit)); break ; case 2 : ReadOldH^=(0x01(7-Tier_bit)); break ; default : break ; } write_data(ReadOldH); write_data(ReadOldL); } else { switch(Color) { case 0 : ReadOldL=(~(0x01(15-Tier_bit))); break ; case 1 : ReadOldL|=(0x01(15-Tier_bit)); break ; case 2 : ReadOldL^=(0x01(15-Tier_bit)); break ; default : break ; } write_data(ReadOldH); write_data(ReadOldL); } write_com(0x30); } void main(void) { uchar i,j,colour=1,T=0; RW=0 ; lcdreset(); ceshi(); clrgdram(); delay(2000); clrscreen(); while(1) { for(i=0;i128;i++) { j=32-32*sin(2*i*3.14/(64+T)); DrawPoint(i,j,colour); } //T+=4; delay(5000); } while(1); } #define LCD12864_DatePort P2 bit LCD12864_CheckBusy() //读忙碌状态 { bit i; RS=0; RW=1; E=1; LCD12864_DatePort=0xff; delay_ms(1); i=(bit)(LCD12864_DatePort0x80); E=0; return(i); } void LCD12864_DrawPoint( unsigned char X, unsigned char Y, unsigned char Color ) { unsigned char Row , Tier , Tier_bit ; unsigned char ReadOldH, ReadOldL ; LCD12864_WriteCmd( 0x34 ) ; LCD12864_WriteCmd( 0x3