实验04 DHC Relay配置.docVIP

目录 实验04 DHCP Relay 1 4.1 实验目的 1 4.2 实验环境 1 4.3 实验步骤 1 4.3.1 DHCP Server的配置 1 4.3.2 配置DHCP Relay 3 实验04 DHCP Relay 实验目的 熟悉S6506以太网交换机的DHCP Relay功能； 熟悉并掌握S6506以太网交换机DHCP Relay的配置； 实验环境 在实验中，我们需要一台Quidway S6506以太网交换机，一台Quidway S3526，至少1台PC，一台DHCP Server，专用配置电缆一根，网线若干。实验组网如下图所示：SwitchA的端口E2/0/17与SwitchB的端口E0/17相连，SwitchA的端口E2/0/1接客户端Client C；SwitchB的端口E0/1、端口E0/2分别接DHCP Server 和Client A且在同一VLAN下，SwitchB的端口E0/9接Client B，在另一VLAN内。 实验步骤 本实验主要目的的学习华为Quidway S6506以太网交换机的DHCP Relay功能，同时进行简单的DHCP Server的配置准备介绍。 DHCP Server的配置 实验中，我们可以采用Windows2000 Server提供的DHCP Server进行实验，也可以采用华为Quidway S系列路由器提供的DHCP Server进行实验。为了加强大家对Quidway S系列路由器的理解和配置，本实验采用后者。 配置DHCP Server [DHCP_Server] interface Ethernet 0 [DHCP_Server-Ethernet0] ip address [DHCP_Server] dhcp enable [DHCP_Server] dhcp server forbidden-ip [DHCP_Server] dhcp server forbidden-ip [DHCP_Server] dhcp server forbidden-ip [DHCP_Server] dhcp server forbidden-ip [DHCP_Server] dhcp server ip-pool 0 [DHCP_Server-dhcp0] network mask [DHCP_Server-dhcp0] gateway-list [DHCP_Server-dhcp0] dns-list 52 15 [DHCP_Server-dhcp0] domain-name [DHCP_Server-dhcp0] quit [DHCP_Server] dhcp server ip-pool 1 [DHCP_Server-dhcp1] network mask [DHCP_Server-dhcp1] gateway-list [DHCP_Server-dhcp1] dns-list 52 15 [DHCP_Server-dhcp1] domain-name [DHCP_Server-dhcp1] quit [DHCP_Server] dhcp server ip-pool 2 [DHCP_Server-dhcp2] network mask [DHCP_Server-dhcp2] gateway-list [DHCP_Server-dhcp2] dns-list 52 15 [DHCP_Server-dhcp2] domain-name [DHCP_Server-dhcp2] quit [DHCP_Server] dhcp server ip-pool 3 [DHCP_Server-dhcp3] network mask [DHCP_Server-dhcp3] gateway-list [DHCP_Server-dhcp3] dns-list 52 15 [DHCP_Server-dhcp3] domain-name 为了DHCP Server能够相应远端客户端主机，还需要配置路由。 [DHCP_Server]ospf enable [DHCP_Server-ospf]interface Ethernet 0 [DHCP_Server-Ethernet0]ospf enable area 0 验证DHCP Server是否正常 在和DHCP Server同一本地局域子网内，使用客户端自动获取IP地址。 以Win2000为例： C:\ipconfig Windows 2000 IP Configuration Ethernet adapter Local: Connection-specific DNS