基于18B20的温度检测与无线传送接收设计-翻译.docVIP

外文文献资料 收集：苏州大学应用技术学院 11电子班（1116405023）陆妍松 Temperature sensor and wireless module This paper is designed a DS18B20 temperature data acquisition system, the system mainly consists of the microcontroller circuit and a digital sensor DS18B20 based. Software, we use keil software writing and debugging the program, the hardware side, we passed Proteus circuit simulation software, hardware, and test, the system is simple, low power consumption, through LCD1602 display the measured temperature. Temperature measurement accuracy of the system is relatively high, and stable communication with the microcontroller and PC. DS18B20 temperature sensor is American DALLAS Semiconductors latest smart temperature sensor, an improved, compared with the traditional thermistor temperature measurement devices, which can be read directly measured temperature, and can be based on actual requirements through simple programming 9 to 12 to achieve a digital readout mode. This design is a simple and practical small digital thermometer, the main components used with a sensor 18B20, microcontroller AT89S52 , one of four common cathode LED, resistor capacitor number. 18B20 support bus line interface, measurement temperature range -55℃ to +125℃. Within range-10℃ to+85℃, accuracy of ±0.5℃. 18B20 poor accuracy of ±2℃. Temperature directly to the scene bus line digital transfer, which greatly improves the systems interference. The site is suitable for temperature measurement in harsh environments, such as: environmental control, equipment or process control, temperature and other consumer electronics products. The digital thermometer design is divided into five parts, the main controller, LED display section, the sensor part, the reset part, clock circuit. That is part of the master controller microcontroller for storing programs and control circuit; LED display section refers to the four common anode digital tube, to display the temperature; sensor part, that the temperature sensor is used to collect