杨永斌院士非线性分析报告.pptVIP

* Generalized displacement control GDC method General stiffness parameter Indicator for stiffness change Limit points Unloading * 24-member shallow dome Hangai et al. 1971 , Jagannathan et al. 1975 , Holzer et al. 1980 , Papadrakakis 1981 Zero load condition Vert displ of joint 1 equals 2 cm + vert displ of joint 2 * * Two-member truss Pecknold et al. 1985 Adjacent equilibrium paths Bench mark for testing path-tracing schemes Perfect and imperfect loadings * Imperfect case * Horizontal load * Hinged circular arch a Perfect loading b Imperfect loading * Angled frame Related publications Yang Shieh 1990 , “Solution Method for Nonlinear Problems with Multiple Critical Points,” AIAA J., 28 12 , 2110-2116. Kuo Yang 1995 , “Tracing Postbuckling Paths of Structures Containing Multi Loops,” Int. J. for Numer. Meth. in Eng., 38 23 , 4053-4075. * Comments from E.L. Cardoso et al. Communications in Numerical Methods in Eng., 23 4 , 2006, 263-271: The GDC method ranks among many techniques proposed to solve non-linear equilibrium equations with both limit and snap-back points Yang Shieh 1990 . … is a very reliable path following method, capable of overcoming both limit and snap back points. * Extension of the rigid element concept to other elements * Triangular Plate Element TPE * Shallow dome H 12.7 mm h 6.35 mm thick thin * Right angled frame * * Related publications Yang et al. 2007 , “Solution Strategy and Rigid Element for Nonlinear Analysis of Elastic Structures Based on Updated Lagrangian Formulation”, Eng. Struct., 29 6 , 1189-1200. Yang et al 2007 , “Rigid Body Concept for Geometric Nonlinear Analysis of 3D Frames, Plates and Shells Based on the Updated Lagrangian Formulation,” Comp. Meth. in Appl. Mech. Eng., 196 7 , 1178-1192. * Curved beams * Key issue Equilibrium of joints should be enforced in deformed position * Curved beam element Rigid element: same for straight curved beams Transformation of coordinates * Posit