7515C_4.1_UT10_PPT(网络管理).pptVIP

NORTEL NETWORKS CONFIDENTIAL - SPECIAL HANDLING Passport Network Management Unit 10 7515C 4.1 Unit 10 Objectives Use RMON with a MIB Perform port mirroring Provide network security by locking ports, configuring access list, and changing passwords Implement the Network Time Protocol RMON Group 1 statistics: Gathering alarm statistics Group 2 history: Tracking a history of alarms Group 3 alarms: Setting alarms for user-defined events Group 9 events: Creates entry in monitor log and/or SNMP trap Enabling RMON RMON Statistics Viewing RMON Statistics Creating RMON History Viewing RMON History Creating RMON Events RMON Alarm Threshold Creating RMON Alarms RMON Trap Example Ingress Port Mirroring Egress Port Mirroring Port Mirroring Scalability Port mirroring scalability allows you to mirror up to 25 ports at a given time. Traffic can be mirrored based on ingress, egress, or both TX and RX . You can create up to 100 entries. When not in use, disable mirroring to reduce the load on the switch. Ports supported by the same OCTAPID can only be mirrored to the same destination. One port cannot be mirrored to multipled destinations. Configuring Port Mirroring with DM Configuring Port Mirroring with DM continued Using the Configuration Display Hardware Limitation Example Configuring Port Mirroring with the CLI config diag mirror-by-port : create in-port out-port enable true|false delete info mirrored-port mirroring-port mode tx|rx|both Configuring Port Mirroring with CLI continued Example: mirrored ports slot 1, port 1 to mirroring port slot 1, port 2: create in-port 1/1 out-port 1/2 mode both If you try to create another mirroring port with the same mirrored port 1/1 : create in-port 1/1 out-port 4/1 - Error: Entry with mirrored port already exists Egress Mirroring: E-Modules For the Device Manager: Select a card. The part number of the module is shown in the BackPartNumber field. Passport 8600 E-Modules are identified by the part number followed