开关电源黑盒测试规范详解.docVIP

1. 目的...................................................................................... 2 2. 适用范围.................................................................................. 2 3. 测试所用仪器与设备........................................................................ 2 4. 测试基本原则及判定准则.................................................................... 2 4.1 测试基本原则.......................................................................... 2 4.2 不合格项目分类........................................................................ 2 5. 测试内容和方法............................................................................ 2 5.1 最大输入电流.......................................................................... 2 5.2 交叉调节测试（交调测试） ............................................................. 3 5.3 电压调整率（源效应） ................................................................. 3 5.4 负载调整率（负载效应） ................................................................3 5.5 稳压精度...............................................................................4 5.6 效率...................................................................................4 5.7 最大空载功耗...........................................................................4 5.8 输出纹波与噪声.........................................................................4 5.9 容性负载特性...........................................................................6 5.10 输入电压范围..........................................................................6 5.11 启动冲击电流..........................................................................6 5.12 动态响应..............................................................................7 5.13 开关机过冲............................................................................7 5.14 输出电压上升时间及下降时间............................................................8 5.15 开机延时（启动延时） .................................................................8 5.16 关机延时（保持时间） .................................................................9 5.17 输入过压、