常用通信英语词汇.docVIP

常用通信英语词汇 产品与服务技术支持购买行业关于 Agilent 注册 登录 中国 Home 行业 RF Microwave EMI EMC EMI EMC 选择国家或地区 与我们联系 Transmit and Receive In-Band and Out-of-Band Spurious Emissions -------------------------------------------------------------------------------- Definition Spurious emissions are unwanted emissions, emanating from the equipment under test. The frequency bands (in-band and out-of-band) and their corresponding spurious emission limits are specified by regulatory agencies such as the Federal Communications Commission (FCC) in the United States and ETSI in Europe. Standards IEEE Std 802.11b-1999 16 September 1999 Paragraph 18.4.6.8 Transmit and receive in-band and out-of-band spurious emissions IEEE Std 802.11a-1999 16 September 1999 Paragraph 17.3.8.4 Transmit and receive in-band and out-of-band spurious emissions ANSI/IEEE Std 802.11 First edition 1999-00-00 Paragraph 15.4.6.5 Transmit and receive in-band and out-of-band spurious emissions FCC CFR47 15.205 - Restricted bands of operation FCC CFR47 15.209 - Radiated emission limits; general requirements FCC CFR47 15.247 - Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz FCC CFR47 15.407 - General technical requirements ETS 300-328 Measurement Subtleties Some spurious emissions limits are based on using a quasi-peak detector. Not all spectrum analyzers have this type of detector. You could use a peak detector during product evaluation because it gives results that are equal to or higher than a quasi-peak detection. Test Tools D