Informatin for IEC60825-1.docVIP

8 CLASSIFICATION 8.2 Classification responsibilities 8.3 Classification rules 8.3a Radiation of a single wavelength 8.3b Radiation of multiple wavelengths 1) Laser product emission two or more wavelengths in spectral regions shown as additive in Table 5 : 2) Laser product emission two or more wavelengths in spectral regions not shown as additive in Table 5 : 8.3c Radiation from extended sources : Value of angular subtense ( (mrad) : 8.3d Non-uniform retinal image radiance profile, non-circular and multiple sources 8.3e Time basis 1) 0.25s 2) 100s 3) 30000s 8.3f Repetitively pulsed or modulated lasers 1) Exposure from any single pulse not exceeding the AEL for a single pulse 2) Average power for a pulse train 3a) Constant pulse energy and pulse duration 3b) Varying pulse widths or varying pulse durations 9 DETERMINATION OF ACCESSIBLE EMISSION LEVELS 9.1 Tests Single fault eliminated Housing material withstanding degradation Fault detection 9.2 Measurement conditions : Measured laser radiation : See table “measured laser radiation, calculations and comparison with AEL limits” 9.3 Measurement geometry 9.3.1 General, evaluation scheme ― a) Simplified (default) method b) Increased AEL by parameter C6 9.3.2 Default (simplified) evaluation Condition applied : Aperture stop diameter (mm) : Measurement distance (mm) : 9.3.3 Extended sources C6 : 9.3.3a Aperture diameters Condition applied : Aperture stop diameter (mm). : Angular subtense of the apparent source ( : 9.3.3b Angle of acceptance Condition applied : 1) Photochemical retinal limits : Angel of acceptance : 2) All other retinal limits : Angel of acceptance :  Measured laser radiation, calculations and comparison with AEL limits:  National Differences for (country name)  Appended table EQUIPMENT MANUFACTURE INFORM