HELIUMLEAKAGETESTINGREPORT压力测试报告.docVIP

项目名称 Project name 测试时间 Test date 客户名称 End user 订单号 Order No.: 负责人 Supervisor 合同号 Contract No. 测试面板: Panel description 测试区域 Test area 所属设备编号 Tools number 客户图纸号 Customer drawing number 测试前检查 Visual inspection before testing 检查结果Result 测量仪器数据 Measurement instrument status All components are well fixed on the panel w/o stress 所有面板上的部件固定且无应力 □ Y □ N Check with customer to make sure all components capable for the testing pressure 请客户检查确定所有部件可承受 □ Y □ N 压力传感器精度 Pressure gauge accuracy class : All valves and regulators are in full open position 阀门和减压阀等在全开状态 □ Y □ N Verification date: All connections are tight, end fittings are properly capped 所有连接紧固，末端接头盖帽拧紧 □ Y □ N 测试est beginning Temp: 测试数据 Test data 合格标准 Acceptance criteria 测试 Test beginning pressure 测试结束压力 Test end pressure 测试结束温度 Test end Temp 面板测试结果 Panel test result □ 合格 Pass □ 不合格 Failure 下降比率（温度补偿） Pressure change rate Temp compensation % 测试人签名： Tested by: 日期： Date: 批准人签名： Approved by: 日期： Date: Pressure testing Report 压力测试报告CH-7.5.0-404 Rev: - MCN #: 110815-01 Date: 2015-5-12 Page 1 of 1 Printed copies are uncontrolled unless marked CONTROLLED in red. Uncontrolled copies must be verified as current before use. 没有标红色“受控”字样的印刷本都是非受控本，使用前必须确认其内容是最新的。 This document and information on it are the confidential property of Swagelok Company and are loaned to you for a limited purpose. Neither may be copied, exhibited, or furnished to others in any form without the written consent of Swagelok Company 本文档及其中的信息是世伟洛克的机密财产，目前是出于有限用途而借给您使用。 没有世伟洛克公司的书面同意，不得对它们进行复制、展示，或将它们以任何形式提供给他人。