TX-1C1602液晶显示时间年月日可调.docVIP

#includereg52.h #define uchar unsigned char #define uint unsigned int sbit dula=P2^6; sbit wela=P2^7; sbit rs=P3^5; sbit lcden=P3^4; sbit s1=P3^0; sbit s2=P3^1; sbit s3=P3^2; sbit rd=P3^7; uchar s1num; uint count; char miao,shi,fen,tian,yue,xqi,x,nian; uchar code table[]= 2013-01-01 1 ; uchar code table1[]= 12:00:00; void delay(uchar z) { uchar x,j; for(x=z;x0;x--) for(j=110;j0;j--); } void write_com(uchar com)//写指令 { rs=0; lcden=0; P0=com; delay(5); lcden=1; delay(5); lcden=0; } void write_date(uchar date)//写数据 { rs=1; lcden=0; P0=date; delay(5); lcden=1; delay(5); lcden=0; } void init() // 初始化 { uchar num; dula=0; wela=0; lcden=0; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80); for(num=0;num17;num++) { write_date(table[num]); delay(10); } write_com(0x80+0x40); for(num=0;num10;num++) write_date(table1[num]); delay(10); TMOD=0X02; //设定时器0为工作方式2 TH0=0x06; //初值为12Mhe0.25ms TL0=0x06; EA=1; ET0=1; TR0=1; nian=13; yue=1; tian=1; xqi=1; shi=12; } void write_sfm(uchar add,uchar date) //定位显示第二行 { uchar shi,ge; shi=date/10; ge=date%10; write_com(0x80+0x40+add); write_date(0x30+shi); write_date(0x30+ge); } void write_sfm1(uchar add,uchar date) //定位显示第一行 { uchar shi,ge; shi=date/10; ge=date%10; write_com(0x80+add); write_date(0x30+shi); write_date(0x30+ge); } void write_sfm2(uchar add,uchar xqi) //定位显示星期 { write_com(0x80+add); write_date(0x30+xqi); //0x30的意思是数据从码表中0开始 } void keyscan() //键盘扫描 { rd=0; if(s1==0) { delay(5); if(s1==0); { s1num++; while(!s1); if(s1num==1) { TR0=0; write_com(0x80+0x40+11); write_com(0x0f); } if(s1num==2) { write_com(0x80+0x40+8); } if(s1num==3) { write_com(0x80+0x40+5); } if(s1num==4) { write_com(0x80+12); } if(s1num==5) { write_com(0x80+9); } if(s1num==6) { write_com(0x80+6); } if(s