vargal螺栓防松螺母青岛震坤行.docVIP

VARGAL all-metal self-locking nuts are successfully employed in all applications where vibrations and/or high temperatures are usually cause of possible looseness.The main technical features are listed here below: Self-locking nuts LOCKING ACTIONThe spring action, pressing the nut collar on the screw, exerts the locking effect.Such effect does not change during subsequent unscrewings as the locking element has no direct contact with the friction surfaces and consequently it is not subject to wear.REUSABILITYVARGAL locknuts can be used several times maintaining almost unchanged the removal prevailing torque.VIBRATION PROOFAn excellent vibration resistance is ensured since vibrations accentuate the spring and the collar contraction on the screw.NO-LOSS The locking action remains even when there is a lack of clamping force, therefore the nut never comes loose or gets lost; consequently there is never any separation among the assembled elements.TEMPERATURES VARIABILITY PROOFVARGAL locknuts can withstand changes of temperatures ranging from -50°C to +200°C.VARGAL locknuts with stainless steel springs are available for higher temperature applications. OPTIONSVARGAL locknut is produced in a variety of versions as regards the following:- ??Material- ??Height-?? Pitch- ??Surface coating CORROSION PROOFVARGAL locknuts is available in different solutions, resistant to various corrosion levels according to the uses:-??Zinc plating-??Dacromet 500B- ?Stainless steel (nut body and spring)SEVERE APPLICATIONSVARGAL locknuts in stainless steel (nut body and spring) are available for high temperatures and/or corrosive enviroment applications;in order to improve their reusability these locknuts could be treated with an antiseizure coating by request. EASY INSTALLATIONNo special tools are required for the fittings of VARGAL locknuts. SELF-LOCKING NUTS VARGAL STANDARD d Pitch s h max m Code Standard Fine StandardPitch FinePitch 56810121214