eigrp使用variance的不等价负载均衡.docVIP

R1： Routeren Router# Router#en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#ho r1 r1(config)#int e1/0 r1(config-if)#ip add 14.14.14.1 255.255.255.0 r1(config-if)#no shu r1(config-if)# *Mar 1 00:01:45.747: %LINK-3-UPDOWN: Interface Ethernet1/0, changed state to up *Mar 1 00:01:46.747: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1/0, changed state to up r1(config-if)#int s0/0 r1(config-if)#ip add 12.12.12.1 255.255.255.0 r1(config-if)#no shu r1(config-if)# *Mar 1 00:02:04.811: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up *Mar 1 00:02:05.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up r1(config-if)# r1(config-if)#int s0/1 r1(config-if)#ip add 13.13.13.1 255.255.255.0 r1(config-if)#no shu r1(config-if)# *Mar 1 00:02:28.087: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up *Mar 1 00:02:29.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to up r1(config-if)# r1(config-if)#router eigrp 90 r1(config-router)#net 0.0.0.0 r1(config-router)#no au r1(config-router)#no auto-summary r1(config-router)#end r1# R2： Router Routeren Router# Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#ho r2 r2(config)#int s0/0 r2(config-if)#ip add 12.12.12.2.0 255.255.255.0 ^ % Invalid input detected at ^ marker. r2(config-if)#ip add 12.12.12.2 255.255.255.0 r2(config-if)#clo r2(config-if)#clock ra r2(config-if)#clock rate 2000000 %Clockrate bestfitted (rounded) to 2016000 r2(config-if)#no shu r2(config-if)#int *Mar 1 00:04:17.615: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up *Mar 1 00:04:18.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to ups r2(config-if)#int s0/1 r2(config-if)#ip add 24.24.24.2 255.255.255.0 r2(config-if)#clo r2(config-if)#clock ra r2(config-if)#clock rate 2000000 %Clockrate bestfitted (rounded) to 2016000 r2(