Zigbee控制灯.docVIP

表示灯的相关宏定义/* LEDS - The LED number is the same as the bit position */#define HAL_LED_1 0x01#define HAL_LED_2 0x02#define HAL_LED_3 0x04#define HAL_LED_4 0x08#define HAL_LED_ALL?? HAL_LED_1 | HAL_LED_2 | HAL_LED_3 | HAL_LED_4 灯的5种模式/* Modes */#define HAL_LED_MODE_OFF 0x00#define HAL_LED_MODE_ON 0x01#define HAL_LED_MODE_BLINK?? 0x02#define HAL_LED_MODE_FLASH?? 0x04#define HAL_LED_MODE_TOGGLE 0x08 控制灯的相关API中的一些默认参数/* Defaults */#define HAL_LED_DEFAULT_MAX_LEDS 4#define HAL_LED_DEFAULT_DUTY_CYCLE??? 5#define HAL_LED_DEFAULT_FLASH_COUNT?? 50#define HAL_LED_DEFAULT_FLASH_TIME??? 1000 设定灯的状态/** Set the LED ON/OFF/TOGGLE.*/extern uint8 HalLedSet uint8 led, uint8 mode ;示例：HalLedSet HAL_LED_ALL, HAL_LED_MODE_OFF ;HalLedSet HAL_LED_4, HAL_LED_MODE_OFF ;HalLedSet HAL_LED_4, HAL_LED_MODE_FLASH ;HalLedSet HAL_LED_3, HAL_LED_MODE_FLASH ; 控制灯闪/**************************************************************************************************** @fn HalLedBlink** @brief?? Blink the leds** @param?? leds - bit mask value of leds to be blinked* numBlinks - number of blinks* percent??? - the percentage in each period where the led* will be on* period - length of each cycle in milliseconds** @return None***************************************************************************************************/void HalLedBlink uint8 leds, uint8 numBlinks, uint8 percent, uint16 period 示例： HalLedBlink HAL_LED_ALL , 5, 50, 500 ;HalLedBlink HAL_LED_2, 0, 50, 500 ;HalLedBlink HAL_LED_4, 0xFF,HAL_LED_DEFAULT_DUTY_CYCLE,HAL_LED_DEFAULT_FLASH_TIME ;HalLedBlink HAL_LED_4, 0, 50, 500 ; /**************************************************************************************************** @fn HalLedOnOff** @brief?? Turns specified LED ON or OFF** @param?? leds - LED bit mask* mode - LED_ON,LED_OFF,** @return none***************************************************************************************************/void HalLedOnOff uint8 leds