金蝶K3wise建立账套.docVIP

金蝶K3WISE账套管理账套 锦毅 2015-09-02 金蝶K3WISE账套管理建立账套 1 1 目录 1 2 进入账套管理 1 3 新建账套 1 4 账套设置 2 5 启用账套 4 进入账套管理 新建账套 上面的新建弹出对话框按下面要求操作，完成后点确定。 后，360会警报，全部选择允许过程需等待一段时间。账套名称：账套不重复即可，账套名称就是公司的名称，：。 文件：一个文件夹存放数据文件，如存放在D:\kddata文件夹日志一样。 SQL身份验证，系统用户名：sa密码：SA密码 账套设置 账套生后，如下图上面的设置，进行账套的启用。 名称：公司的名称 按默认即可 期间更改弹出的对话框中，改成要启用的期间 如果要设置年为3月1到次年的2月28，请按如下图2。 自然年度会计期间，不勾选。 的期间1日期改成2015-3-1。3份为第一期。下图。 启用账套参数设置保存后，点击确定，提示是否启用账套。如果设置无误，即可启用。 后，系统就可以开始正常的基础数据，初始化。 a special tool to measure half a point the rotor shaft runout and simultaneous measurement of two coupling flutter testing, it should meet the requirements. Install the coupling housings to ensure embedded rotor coupling within a concave shoulder, and rotor clearance meets the design requirements. 6.4, 6, wearing construction technology of generator rotors demonstration 6.4.6.1 construction preparation and conditions through the stator before loading check and confirm to confirm air tightness test of the stator and stator mechanical, electrical, instrumentation and control and other related work had been completed. Internal cleaning of stator, high power vacuum the surface of the stator. Stator and rotor magnetic Center drainage is complete. In conjunction with the quality, mechanical, electrical and other relevant persons to finally cleaning check the stator, which is clean and free of any debris. Worn rotors check and confirm confirm before loading the rotor air tightness test, electrical test work has been completed. In conjunction with the quality, mechanical, electrical and other relevant persons to finally clean the rotors checked, its interior is clean and free of any debris. By quality, mechanical, electrical and other professionals to conduct an examination of the rotor, confirm the wear condition of the rotor. Special equipment inspection and rotor through the preparation tool before loading inventory, check to confirm that it appears intact, complete tool, tools required for use of wire rope that has