冷箱损坏区域代码.docVIP

Reefer Container Location Code 冷藏箱部位代码 Characteristics 特征 1. The container location code consists of 4 characters. 1、冷箱的部位代码由4个字符组成； 2. Each face of a 20ft or 40 ft container is divided into areas of 1,200mm x 1,200mm 4ftx 4ft . A numbering system is then applied from the door end to the front end. In case of door and front panel, the numbering is applied from left to right. For 20ft container, there are 5 sections numbered 1 to 5. For 40ft container, there are 10 sections numbered 1 to 0 1, 2, 3, 4, 5....9, then 0 . 2、20ft和40ft集装箱的每一面都分成1200mm×1200mm（4ft×4ft）的小区域。编号系统是由集装箱的门端开始到前端结束。在箱门和前段板，编号系统是由左至右。如20ft集装箱从门端至前端有5个区域，编号1至5。40ft集装箱从门端至前端有10个区域，编号1到0 （1、2、3、4、5……9,最后是0） 3. Different from the non-reefer container, reefer container has a refrigeration unit, specially for which there exists another set of codes. 3、区别与非冷藏箱，冷箱有针对于制冷部件的另外一套代码。 First character 第一字符 The first character is to identify the appropriate face of the reefer container. 第一字符用于识别冷箱的适当面 Description 描述 Code代码 Bottom floor 底部（地板） B Door end rear 门端（后端） D Container exterior 箱体外部 E Front end 前端 F Container interior 箱体内部 I Left side 左侧 L Right side 右侧 R Top roof 顶部（顶板） T Understructure 底结构 U Whole container or unit 整个集装箱或部件 X Unspecified component 未说明部件 N Refrigeration unit 制冷部件 M 2nd character 第二字符 Second character is to identify the appropriate parts of the container where the damage is located. It varies according to the first character. 第二字符用于识别集箱损坏部件的定位，他不同于第一字符 ? The following character list can be referred if the first character is NOT M. The vertical panels of the container are divided into top and bottom halves. Components are divided into upper and lower main components. The horizontal faces,such as roof, are divided into right and left halves when viewed from the door end. ? 以下字符表是在第一字符不为“M”的前提下使用。集箱的垂直面被分为上半部和底半部，部件分为上半部和下半部。在水平面，如顶板站在门端看被分成右半部和左半部。 Description 描述 Code代码 Top half 上半部 T Bottom half 下半部 B Upper component 顶部件 H Lower component 底部件 G L