PROE转AUTOCAD的转换设置图层颜色线型2.docVIP

如要使用，前提是要config.pro文件中添加：（注意路径要与自己的一致）!工程图设置intf_out_layer? ? part_layer!导出为dwg和dxf格式时，??自动生成图层dxf_export_mapping_file? ?D:\program files\ptc\work\Dxf_export.pro!图层设置配置文件! This is a test dxf_export.pro file! This is written by Wafer! map_layer Dxf_Dimension Dimmap_layer Dxf_Axis Axismap_layer Dxf_Hatching Hatchmap_layer Dxf_Text Textmap_layer Dxf_Table Table!表格map_layer Dxf_Hidden_line Hidmap_layer Dxf_Format Format!图框map_layer Dxf_Continuous_Line Solidlinemap_color LETTER_COLOR 3!绿色map_color HIDDEN_COLOR 2!黄色map_color SECTION_COLOR 4!青色map_color CURVE_COLOR??3!绿色map_line_style Phantom Dashedmap_line_style Hidden Dashedmap_line_style Geometry Solidlinemap_line_style Centerline Dashdot map_line_style Leader Solidline EXPORT文件例子： map_layer layer1map_color：map_color LETTER_COLOR 3/*绿色（尺寸线颜色）map_color HIGHLIGHT_COLOR 1/*红色（高亮线：如自动生成的尺寸颜色）map_color GEOMETRY_COLOR 7/*白色 （实体线颜色）map_color DIMMED_MENU_COLOR 85/*深绿色 （次加亮项目：如弱尺寸颜色）map_color DIMMED_COLOR 92/*暗绿色 map_color EDGE_HIGHLIGHT_COLOR 6 /* 洋红色? ? 加亮的参照、尺寸中的文字颜色 map_color HIDDEN_COLOR 248/* 深褐色（隐藏线颜色）map_color VOLUME_COLOR 24/* 褐色 （失效的尺寸和NC中的体积块颜色）map_color SECTION_COLOR??150/* 天蓝色（破断线颜色）map_color SHEETMETAL_COLOR 255/*黑色??（板金件的驱动曲面颜色）map_color CURVE_COLOR??5/*蓝色??（曲线颜色）map_color SKETCH_COLOR 4/*浅蓝map_color DATUM_COLOR??150/*天蓝色??（面、轴、点、坐标系颜色）map_color QUILT_COLOR??230/* 艳红色（面组颜色）map_color BACKGROUND_COLOR 255/*黑色map_color HIDDEN_LINE_COLOR 42/*深灰色 （隐藏线颜色）map_color Phantom??248 /*深褐色 （虚线颜色）map_color Leader 220/*桃红色 （导引线颜色）map_color half_tone_color 150/*天蓝色??（CAD/CA中心线颜色）map_color??attention_color 170/*纯蓝色??（标注线颜色）map_line_style??phantomfont??CENTER 32/*深橘色map_line_style??ctrlfont??CENTER 146/*藏青色map_line_style??CONTINUOUS??CENTER 204/*紫红色 map_layer? ?DXF_DIMENSION Dim map_layer? ?DXF_TEXT Textmap_layer? ?DXF_HATCHING Hatchmap_layer? ?DXF_TABLE Tablemap_layer? ?DXF_BALLOON Balloonmap_layer? ?DXF_FORMAT Formatmap_line_style??solidfont byl