OSU-1571288N01-HOUS_BASE_AP-20081013-A1-odo-1030-f.pptVIP

Sliders 1 Texture Area Texture Area Texture surface Text Text Draft check 1 Draft check 2 Draft check 2 Draft check 3 Draft check 4 Draft 4 modification Draft check 5 Draft check 6 Motorola design example Draft check 8 Draft check 9 Suggest 1 Suggest 1 modification Suggest 2 Suggest 3-a Suggest 3-b Suggest 4 Suggest 5 Suggest 5 modification Suggest 6 Suggest 7 Suggest 7 modification Suggest 8 Suggest 8 modification Suggest 9 Suggest 9 modification Suggest 10 Suggest 10 modification Suggest 11 Suggest 11 sample Suggest 12-a Suggest 12-b Suggest 13 Suggest 14 Suggest 15 Ground bolt recess update Modification 圖示產品平均肉厚為2.5mm,肋條太厚表面會產生縮水,建議將圖示尺寸為2.5mm的肋條改為1.5mm. 2.5mm 2.5mm The product average thickness is 2.5mm, rib is too thick that will shrink, suggest reduce 2.5mm to 1.5mm ODO: change rib thickness to 1.5 mm 圖示產品平均肉厚為2.5mm,兩壁太厚太厚表面會產生縮水,建議將圖示尺寸為3.0mm和3.1mm的壁厚改為2.5mm. 3.1mm 2.5mm 3.0mm The product average thickness is 2.5mm, the two wall is too thick that will shrink, suggest reduce 3.15mm and 3.1mm of the two wall to 1.5mm ODO: follow suggestion to modify thickness 圖示產品平均肉厚為2.5mm,兩壁太厚表面會產生縮水,建議將圖示尺寸為3.0mm的兩處壁厚改為2.5mm. 2.5mm 3.0mm The product average thickness is 2.5mm, the two wall is too thick that will shrink, suggest reduce 3.0mm of the two wall to 1.5mm ODO: follow suggestion to modify thickness 產品平均肉厚為2.5mm,圖示兩壁肉厚太厚表面會產生縮水,建議將圖示兩處壁厚改為2.5mm,為了避免縮水將尺寸為2.0mm的兩處肋改為1.5mm. 3.15mm 3.05mm 2.0mm The product average thickness is 2.5mm, rib is too thick that will shrink, suggest modify the two wall to 2.5mm thick; in order to prevent shrink, suggest reduce the 2.0mm size to 1.5mm ODO: follow suggestion to modify thickness 2.5mm 2.67mm 圖示產品平均肉厚為2.5mm,肋條太厚表面會產生縮水,建議將圖示尺寸為2.67mm的肋條改為1.5mm. The product average thickness is 2.5mm, rib is too thick that will shrink, suggest reduce 2.67mm to 1.5mm ODO: the rib on the real sample is 2.33 mm, so that I change its thickness to 2.3mm 3mm 2.6mm 圖示產品肉厚分部會造成表面嚴重﹐建議如右