Oracle_1g图形界面创建数据库实例.docVIP

Oracle 11g图形界面创建数据库实例 注：以oracle11g为例，在windowsXP操作系统测试通过。 Step1创建数据库实例: 进入开始-所有程序-Oracle-OraDB11g_home1-配置和移植工具-Database Configuration Assistant 进入后如图所示： 点击下一步 默认选项创建数据库，点击下一步： 默认一般事务和用途，点击下一步： 输入数据库名和sid，以qcorcl为例，（注：如果提示没有创建监听器，请在开始-所有程序-Oracle-OraDB11g_home1-配置和移植工具-Net Configuration Assistant进行配置，这里就不一一熬述了）点击下一步： 默认选项，点击下一步： 为不同账户设置不同的口令，我们选择所有账户使用统一管理口令：sinosoft，点击下一步: 点击下一步： 点击下一步： 点击下一步： 点击下一步： 点击字符集，设置数据库字符集为GBk还是UTF-8，点击下一步： 点击下一步： 点击下一步： 点击下一步： 点击完成： 点击确定： 正在启动并创建oracle实例： the oil level to the normal oil level. (2) for the secondary prevention of the leakage of cooling water pipe fittings, valve parts before installation to check ... 4.2 measures to eliminate quality defects of cables cable laying in front of the cable construction, design, supervision and construction units to deliver the design, and drawing the third. Combined the engineering field to find fault, adding omitted items. Because the unit used computer DCS control and adds a great deal of control and signal cables. So you should carefully review, checks for missing physical cable, ready for construction and to verify cable length, specifications, familiar with the cable channel and the device location and bracket cable bracket on the section number. At the time of preparation of the inventory of cable, first of all, the professional carefully study electrical schematics, in accordance with the principle of accounting the cable path cable volume, the number of cores used, total volume and design inventory check cable to cable with and without omission, laying of the cable in order to ensure the process does not put a cable one cable. Finally, at the time of inventory, prepared to take the same path the cables together. Inventory preparation is completed, later in each enclosure affixed on both sides of each side of the cable you want to lay accurately verify cable lengths and set aside. Bridge should be combined, co