独院住宅别墅：装修后花园别墅独栋二层欧式住宅室内外全套设计效果图.docVIP

别墅设计 别墅装修 独院住宅 花园独栋别墅 /content-1763-18565-1.html button. Select [login rule] button above the [rule number] menu under ... Then open the barcode generator for the barcode002 part of the Properties dialog box, click the [factor/control] button in the destination edit box,Open the barcode generator for the barcode003 part of the Properties window, click the [factor/control] button, and then at the destination use the Ctrl + v, to enter into the well on the 2nd floor you just copied right 2nd truck name (example PART_STORE_00099), then click on [OK] button. Open 2 right up 3rd truck Properties window, use the Ctrl + c will [summary] property names are copied. Open the barcode generator for the barcode004 part of the pop-up menu in the property dialog box, click the [factor/control] button in the destination using the Ctrl + v, to enter copy 2 3rd truck name right (case of PART_STORE_00100), then click the [OK] button. Then use Lesson3-2.emu as the file name to save the other. Click on menu bar | simulation | start | or time column in the [start] button, you see the goods are put on the conveyor belt, and robotic loading pallets for through the pulley tracks were moved to the automatic tridimensional warehouse storage. If Tray 1 out of the library, select the tray popup menu [IOSection Library instructionmenu (1 layer). If the tray 2 out of the library, right-click with the mouse on the tray in the pop-up menu, select [IOSection Library instructionenu (2). From 2 out of the tray after it has been transferred to the transit point discharge, workers unloaded the goods. Empty tray again by rail back to automatic stereoscopic warehouse. Remove the cargo by conveyor belts was transferred to corresponding cage inside the vehicle. Note 1: simulation before the start, please set the environment for the 1th floor sections to be seen. Click the menu bar | Environment | Environment button. Select [login rule] button above the [rule number] menu under ... Then open