点评现阶段机床带磨削的加工特点.docVIP

点评现阶段机床砂带磨削的加工特点 　　二、砂带磨削原理 Second, the abrasive belt grinding principle 　1.主轴传动装置。有单速或具有较大灵活性的变速传动,有时装有可逆电动机,以改变砂带的运动方向。皮带速度为10～50m/min,通常取16～30m/min,主传动装置的功率,在每10mm宽的砂带上是0.3～0.7kw。 1. Main shaft driving device. Has a single speed or variable speed drive with larger flexibility, sometimes with reversible motor, in order to change the movement direction of the abrasive belt. The belt speed is 10 ~ 50 m/min, usually take 16 ~ 30 m/min, main transmission power, sand belt in every 10 mm wide is 0.3 ~ 0.7 kw. 　　2.砂带张紧装置。保持磨削及导向时砂带的适当张力在砂带磨削过程中起到重要作用,它影响到砂带的切削性能和加工零件表面粗糙度。当增加砂带拉力时,可