Java面向对程序设计5.docVIP

《Java面向对象程序设计》 实验报告 实验成绩： 批阅教师： 实验5《图形用户界面》 实验学时： 2 实验地点： 本部 实验日期： 实验目的 浏览简单的GUI组件 描述Java GUI的API层次结构 使用框架，面板和简单的GUI组件创建用户界面 理解布局管理器的作用 使用FlowLayout，GridLayout和BorderLayout管理器在容器中布局组件 使用JPane类作为子容器 对swing组件应用边界，工具提示，字体和颜色等常用特性 使用边界可视化地将用户界面组件分组 使用ImageTcon类创建图形图标 实验内容 1.分别使用FlowLayout和BorderLayout管理器编写程序（p346　12.1 12.2）） 二 三 实验结论 1） 2） 3） 七、实验小结 学好基础，多翻书，注意细节 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of the guarantee instrument tubes as small as possible, selection of high quality, high precision sleeve connector. Instrument pip