实验11vlan间路由(模拟器).docVIP

实验十一 vlan间路由 实验目的： 学习dynamips+dynagen模拟器搭建 学习单臂路由配置方法 学习三层交换机配置方法 实验步骤： 1 安装模拟器： 安装抓包公共函数库 WinPcap_4_0_2.exe 安装windows版dynagen-0.11.0_win_setup.exe 把调试好的配置文件复制到安装目录 修改idelpc参数 配置试验topo图的net文件 执行net文件 使用putty用telnet登录相应的TCP端口开始试验 第一部分 单臂路由配置  试验拓扑配置如下 autostart = True ghostios = True sparsemem = True ghostsize = 512 [localhost:7200] [[3640]] image = C3640-IK.BIN ram = 128 nvram = 128 # Size of NVRAM disk0 = 64 # Set size of PCMCIA ATA disk0 disk1 = 64 # Set size of PCMCIA ATA disk1 mmap = True [[router SW1]] model = 3640 console = 3001 ram = 100 confreg = 0x2102 exec_area = 32 mmap = True slot0 = NM-16ESW F0/0 = R1 e0/0 F0/1 = R2 e0/0 F0/2 = R3 e0/0 idlepc = 0x60638d00 [[ROUTER R1]] model = 3640 console = 3002 ram = 100 confreg = 0x2102 idlepc = 0x60638d00 [[router R2]] model = 3640 console = 3003 ram = 100 confreg = 0x2102 exec_area = 32 idlepc = 0x605119f0 [[router R3]] model = 3640 console = 3004 ram = 100 confreg = 0x2102 exec_area = 32 idlepc = 0x605119f0 2配置交换机基本参数 Routeren Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#host sw1 sw1(config)#end sw1#vlan data sw1(vlan)#vlan 10 VLAN 10 added: Name: VLAN0010 sw1(vlan)#vlan 20 VLAN 20 added: Name: VLAN0020 sw1(vlan)#exit APPLY completed. Exiting.... sw1#conf t Enter configuration commands, one per line. End with CNTL/Z. sw1(config)#int f0/1 sw1(config-if)#sw mo acc sw1(config-if)#sw acc vlan 10 sw1(config-if)#int f0/2 sw1(config-if)#sw mo acc sw1(config-if)#sw acc vlan 20 sw1(config-if)#exit sw1(config)# sw1(config)#int f0/0 sw1(config-if)#sw mo tr *Mar 1 00:12:54.299: %DTP-5-TRUNKPORTON: Port Fa0/0 has become dot1q trunk sw1(config-if)#sw tr en dot sw1(config-if)#exit 3配置单臂路由R1 Routeren Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#host r1 r1(config)#int e0/0 r1(config-if)#no sh r1(config)#int e0/0.10 r1(config-subif)#en dot1Q 10 r1(config-subif)#ip