螺纹螺栓螺母螺垫圈及圆柱销圆锥销标准系列.docVIP

螺纹螺栓螺母螺钉垫圈及圆柱销圆锥销标准系列 可下载后放大图片观看 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical ar