Networkig Question.docVIP

CP2012 Revision Questions Which of the following best describes a LAN? a. Uses technologies such as Ethernet, Token Ring and FDDI b. Connects physically adjacent devices c. Provide access to local resources only d. All of the above Which of the following OSI layers handles data encryption, compression and data format? a. Network layer b. Application layer c. Session layer d. Presentation layer e. Transport layer Which of the following specifications does the OSI physical layer define? a. Connectors, cable types, voltages, encoding and modulation b. Voltages, encoding, modulation and frame format c. Frame format, encoding, modulation and session management d. Encoding, modulation frame format, and error correction Which of the following best describes a VPN? a. Is the public switched telephone network b. Is a private network which offers secure connectivity over the public network infrastructure c. Provides unsecured WAN connectivity over the public network infrastructure d. Is a device that provides connectivity to a public phone line. Which of the following is the correct order for the data encapsulation process? a. Bits, packet, frame, segment, data b. Data, frame, segment, packet, bit c. Data, bit, frame, packet, segment d. Data, segment, packet, frame, bit Which of the following is the MAC layer responsible for? a. Physical addressing and media access b. Encapsulation of data into the appropriate frame type c. Routing d. Transmission of electrical, wireless or optical signals What does UTP cable rely upon to reduce electrical noise and interference? a. A foil shield around the cable b. The cancellation of signals which results from the twisting if each pair c. UTP has no mechanism by which noise is reduced d. Color coded plastic insulation on each wire What type of cable would be used to connect the serial port on a PC to the console port on a router? a. A straight through cable b. A crossover cable c. A rollover cable d. A